Bosch Oven Error F01
⚡ Quick Answer: The Bosch oven error code F01 typically indicates a malfunction in the control board, which may result in an unresponsive display or erratic oven beha... ⚠️ Difficulty Varies
What Does Error F01 Mean?
The Bosch oven error code F01 typically indicates a malfunction in the control board, which may result in an unresponsive display or erratic oven behavior. Users may notice the display showing a code starting with 'F1' and potentially experience disabled oven functions or irregular temperature readings. If the error persists, further diagnostics may be necessary to identify underlying issues with the temperature sensor or wiring.
Common Symptoms:
- Oven display shows code starting with F1 (e.g., F1) and may beep
- Oven functions may be disabled when code appears
- Temperature reading or heating irregularities reported with similar codes
Possible Causes
- Control Board
How to Fix Error F01
DIY Fix Confirm the exact code and attempt basic reset
- Note exactly how the code appears on the oven display (e.g., F01 vs F1).
- Turn off the oven completely and disconnect from power (switch off breaker or unplug) for at least 5 minutes, then restore power to see if the code clears.
- Ensure the oven door is fully closed and no buttons are stuck or depressed inadvertently.
Technician Only Diagnose temperature sensor and wiring
- Access the oven cavity rear wall or back panel to locate the oven temperature sensor.
- Visually inspect sensor wiring and connectors for damage, loose connections, or burns.
- Measure sensor resistance with a multimeter (if model documentation available) to check for open or short conditions.
- Replace sensor if out of spec, then retest oven operation.
Parts needed: Oven temperature sensor (RTD / probe), Wiring harness and connectors
- If the error persists after basic resets and simple diagnostics, particularly when the oven remains non‑functional or you cannot safely access internal components.
- If you suspect high‑voltage exposure, visible wiring damage, or control board faults.
Next step
Choose the next step for F01
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Control Board |
| resistance | N/A |
| part_number | 00491854 |
| voltage_rating | 120V AC |
Common Questions
What does F01 error mean on Bosch oven?
F01 indicates a control board malfunction, leading to an unresponsive display or erratic oven behavior.
Can I fix Bosch oven F01 error myself?
Yes, you can try basic resets and ensure the oven door is closed properly, but further diagnostics may require a technician.
How much does it cost to fix F01 error?
The estimated repair cost ranges from ¥5,000 to ¥20,000, depending on parts and technician time.
When should I call a technician for F01?
Call a technician if the error persists after resets, especially if the oven is non-functional or there's visible wiring damage.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!