Beko Refrigerator Error E08

⚡ Quick Answer: The Beko refrigerator error E08 indicates a potential compressor overload, often linked to issues with the ice maker or ice sensor. Symptoms include t... ✅ DIY Fixable

What Does Error E08 Mean?

The Beko refrigerator error E08 indicates a potential compressor overload, often linked to issues with the ice maker or ice sensor. Symptoms include the display showing the E08 code, the ice maker failing to operate correctly, and unusual buzzing sounds coming from the appliance. This error may arise from a faulty ice maker temperature sensor or wiring problems, which can prevent the control board from receiving the necessary signals.

Common Symptoms:

  • Error code E08 or E8 displayed on refrigerator panel
  • Ice maker stops working or displays fault
  • Ice dispenser may fail to dispense ice
  • Control board not receiving expected sensor signal

Possible Causes

  • Ice maker temperature sensor fault or wiring issue (medium)

How to Fix Error E08

DIY Fix Basic inspection and reset

  1. Unplug the refrigerator from mains power for at least 5 minutes.
  2. Check the ice maker area for obvious obstructions or ice buildup.
  3. Reconnect power and see if the error clears.

Technician Only Inspect and test ice maker sensor assembly

  1. Unplug fridge and remove ice bucket/ice maker assembly per model instructions.
  2. Locate the ice maker temperature sensor and wiring harness.
  3. Visually inspect wiring for breaks, corrosion, or loose connectors.
  4. Use a multimeter to measure resistance of sensor (consult model specifications).
  5. Replace sensor if out of expected range or if wiring is damaged.

Parts needed: Ice maker temperature sensor, Ice maker wiring harness

🛑 When to Call a Pro:
  • If error persists after basic reset and user-level inspections
  • If internal wiring or components appear damaged
  • If model-specific service manual indicates different meaning

Technical Specifications

wattage 150W
component Compressor
resistance 3-5 ohms
part_number Beko 4812310100
voltage_rating 220-240V AC

Common Questions

What does E08 error mean on Beko refrigerator?

E08 indicates a compressor overload related to ice maker or ice sensor issues, shown by the error code on the display.

Can I fix Beko refrigerator E08 error myself?

Yes, you can perform basic inspections and reset by unplugging the refrigerator and checking for ice buildup.

How much does it cost to fix E08 error?

The estimated repair cost is low, typically involving the cost of the sensor part plus technician time.

When should I call a technician for E08?

Call a technician if the error persists after a reset, if you notice damaged wiring, or if the service manual indicates different issues.

Data last verified: 2026-01-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!