Beko Refrigerator Error E06
⚡ Quick Answer: The Beko refrigerator error code E06 indicates a malfunction in the compressor relay, which can lead to improper cooling and possibly cause unusual cl... ✅ DIY Fixable
What Does Error E06 Mean?
The Beko refrigerator error code E06 indicates a malfunction in the compressor relay, which can lead to improper cooling and possibly cause unusual clicking sounds. If E06 is displayed on an ice maker module, it signifies a compressor start circuit fault, suggesting an electrical issue with the compressor's startup. It is crucial to determine whether the error appears on the main refrigerator display or on a separate ice maker unit for accurate troubleshooting.
Possible Causes
- Compressor relay
How to Fix Error E06
DIY Fix Check context of the error code
- Confirm whether the E06 code is displayed on the **main refrigerator control panel** or on a **separate ice maker/ice making accessory**.
- If the code is on an ice maker module rather than the fridge control display, note that documented E06 meanings relate to the ice maker compressor start/start circuit.
DIY Fix Basic refrigerator reset attempt
- Try disconnecting the refrigerator from power for 10–15 minutes and reconnecting.
- Observe whether the error reappears on the main fridge display after power restoration.
- If error persists only on ice maker display, focus troubleshooting there.
- If E06 appears on the main refrigerator display and cannot be correlated to an accessory ice maker.
- If there are unusual noises, loss of cooling, or repeated error reappears after reset attempts.
Next step
Choose the next step for E06
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Browse by model — no specific failed part is claimed
Model-compatible Refrigerator parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Search results are not a diagnosis. Verify both the complete appliance model and the retailer's fit information before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Refrigerator Condenser Coil Brush
For routine cleaning of accessible condenser areas where the manufacturer permits it. It does not repair a sealed-system or compressor fault.
Model-Compatible Refrigerator Water Filter
A routine replacement item on models with a water filter. Match the complete appliance model and existing filter number before ordering.
Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Compressor Relay |
| resistance | 0-10 ohms |
| part_number | Beko 280100012 |
| voltage_rating | 220-240V AC |
Common Questions
What does E06 error mean on Beko refrigerator?
E06 indicates a malfunction in the compressor relay, affecting cooling and potentially causing clicking sounds.
Can I fix Beko refrigerator E06 error myself?
Yes, you can try resetting the refrigerator by disconnecting it from power for 10-15 minutes and checking for the error again.
How much does it cost to fix E06 error?
Repair costs vary by model and region; contact a technician for an estimate based on your specific situation.
When should I call a technician for E06?
Call a technician if E06 appears on the main display and does not relate to an ice maker, or if there are cooling issues after resets.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!