Beko Refrigerator Error 5

⚡ Quick Answer: The Beko refrigerator error code 5 indicates a malfunction in the temperature sensor, often caused by a short-circuit in the wiring or a faulty sensor... ⚠️ Difficulty Varies

What Does Error 5 Mean?

The Beko refrigerator error code 5 indicates a malfunction in the temperature sensor, often caused by a short-circuit in the wiring or a faulty sensor itself. This error can lead to erratic temperature readings and inconsistent cooling, preventing the refrigerator from maintaining the desired temperature levels. Users may observe the error code displayed or notice unstable temperatures in the cooling compartments.

Common Symptoms:

  • Error code “5” appears on the refrigerator display or via LED flash pattern.
  • Possible inaccurate or unstable temperature readings in cooling compartments.
  • Refrigerator may fail to maintain correct cooling if sensor data is invalid.

Possible Causes

  • Temperature sensor short‑circuit or wiring short (medium)

How to Fix Error 5

DIY Fix Check basic connections and power reset

  1. Unplug the refrigerator from mains power.
  2. Visually inspect accessible temperature sensor wiring and connectors (inside fridge and freezer compartments).
  3. Ensure connectors are seated and wiring is not visibly damaged or pinched.
  4. Reconnect power and observe if error persists.

Technician Only Diagnose and repair sensor wiring or replace faulty sensor

  1. Enter the service diagnostic mode if available to confirm active fault.
  2. Measure resistance of each temperature sensor (NTC) and check against specification for the model.
  3. Check wiring harness continuity and look for shorts to ground or between conductors.
  4. Replace any sensor with out‑of‑spec resistance or with evidence of internal short.
  5. Repair or replace damaged wiring and connectors as needed.
  6. Verify repair by cycling power and confirming error code no longer appears.

Parts needed: Temperature sensors (NTC thermistors), Wiring harness/connectors

🛑 When to Call a Pro:
  • If you are not familiar with refrigerator electrical systems.
  • If there is visible damage to wiring harnesses or connectors.
  • If error persists after basic connection checks.

Technical Specifications

wattage
component Temperature Sensor
resistance 5-10 kOhms at 25°C
part_number Beko 4812310100
voltage_rating 220-240V AC

Common Questions

What does 5 error mean on beko refrigerator?

Error 5 signals a temperature sensor malfunction, causing erratic temperature readings.

Can I fix beko refrigerator 5 error myself?

Yes, you can check connections and perform a power reset, but further issues may require professional help.

How much does it cost to fix 5 error?

Repair costs range from ¥5,000 to ¥18,000 for sensor replacement and wiring repairs.

When should I call a technician for 5?

Call a technician if you see visible damage to wiring or if the error persists after basic checks.

Data last verified: 2026-01-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!