Beko Induction Hob Error E17

⚡ Quick Answer: The E17 error on your Beko induction hob indicates a malfunction in the temperature sensor, specifically a potential short circuit in the NTC coil. Th... ✅ DIY Fixable

What Does Error E17 Mean?

The E17 error on your Beko induction hob indicates a malfunction in the temperature sensor, specifically a potential short circuit in the NTC coil. This can lead to erratic display behavior, inconsistent heating, or the hob stopping operation altogether. To resolve the issue, it is essential to diagnose and repair the faulty sensor or associated components.

Common Symptoms:

  • Hob stops operation and displays E17
  • Possible failure to heat or unexpected shutdown

Possible Causes

  • NTC coil/temperature sensor short circuit (medium)

How to Fix Error E17

DIY Fix Basic checks before calling service

  1. Turn off and isolate power, wait a few minutes, then restart to see if error persists (power reset)
  2. Ensure cookware is suitable and properly placed, as some error lists associate E‑codes with sensor issues
  3. Check for visible damage or overheating signs on hob surface

Technician Only Diagnose and repair NTC sensor/coil short

  1. Isolate all power to the hob and remove from installation if needed
  2. Access the hob control electronics and locate the NTC temperature sensor/coil circuits
  3. Measure resistance of the sensor coils; check for short or out‑of‑range values
  4. Inspect wiring and connectors for shorts or damage; repair or replace as needed
  5. Replace faulty NTC sensor/coil or associated control board if necessary
  6. Test the hob under load to confirm E17 no longer appears

Parts needed: NTC temperature sensor/coil, Control electronic board, Associated cabling/connectors

🛑 When to Call a Pro:
  • If error persists after power reset
  • If any signs of electrical damage, burning smell, or smoke
  • If user is not comfortable isolating or testing internal components

Technical Specifications

wattage 7400W
component Temperature Sensor
resistance 10-30 ohms
part_number Beko 2802010100
voltage_rating 230V AC

Common Questions

What does E17 error mean on beko induction hob?

E17 indicates a temperature sensor malfunction, causing erratic behavior and heating issues.

Can I fix beko induction hob E17 error myself?

Yes, try power resetting the hob and check cookware placement before calling a technician.

How much does it cost to fix E17 error?

Repair costs range from ¥10,000 to ¥40,000+, depending on parts and labor.

When should I call a technician for E17?

Call if the error persists after a power reset or if there are signs of electrical damage.

Sources & References

Data last verified: 2026-04-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!