Beko Induction Hob Error E58
⚡ Quick Answer: The E58 error on your Beko induction hob signals a malfunction of the CookSensor NTC temperature sensor. This issue may lead to unusual buzzing sounds... ✅ DIY Fixable
What Does Error E58 Mean?
The E58 error on your Beko induction hob signals a malfunction of the CookSensor NTC temperature sensor. This issue may lead to unusual buzzing sounds and an unresponsive display, causing the hob to stop heating. Proper cookware placement is essential, and if the error persists, further inspection of the sensor and wiring is recommended.
Common Symptoms:
- Error E58 displayed on hob control panel
- Induction hob stops heating or goes into fault state
Possible Causes
- CookSensor NTC temperature sensor error (medium)
How to Fix Error E58
DIY Fix Check and reset induction hob
- Turn the hob off and disconnect from mains power for at least 1–2 minutes.
- Check that cookware is appropriate for induction and correctly placed.
- Restart the hob and see if E58 reappears.
Technician Only Inspect and test CookSensor NTC and associated wiring
- Disconnect power and access induction hob internal components.
- Visually inspect sensor wiring and connector for damage or poor contact.
- Test NTC sensor resistance against specification for expected values.
- Replace sensor or wiring if out of tolerance and clear E58 error.
- If sensor and wiring are intact, test and possibly replace control/driver board communicating with the CookSensor.
Parts needed: NTC temperature sensor, Sensor wiring harness, Control board modules
- If error persists after basic reset and checking cookware compatibility
- If sensor wiring is visibly damaged
- If unit does not respond after attempted resets
Next step
Choose the next step for E58
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Induction Hob parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 2000W |
|---|---|
| component | Induction Coil |
| resistance | 10-20 ohms |
| part_number | Beko 280007157 |
| voltage_rating | 230V AC |
Common Questions
What does E58 error mean on Beko induction hob?
E58 indicates a CookSensor NTC temperature sensor malfunction, causing the hob to stop heating.
Can I fix Beko induction hob E58 error myself?
Yes, try resetting the hob and ensuring cookware is compatible and correctly placed.
How much does it cost to fix E58 error?
Repair costs can range from $50 to $200+, depending on parts and labor.
When should I call a technician for E58?
Call a technician if the error persists after a reset or if wiring is damaged.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!