Beko Induction Hob Error E16
⚡ Quick Answer: The Beko induction hob error E16 indicates a failure in the temperature sensor circuit, specifically an open circuit in the NTC temperature sensor of ... ✅ DIY Fixable
What Does Error E16 Mean?
The Beko induction hob error E16 indicates a failure in the temperature sensor circuit, specifically an open circuit in the NTC temperature sensor of the induction coil. This error is usually displayed as E16 on the control panel, leading to a loss of heating function and normal operation. A flashing display is common, signaling that the hob is unable to generate heat.
Common Symptoms:
- Error E16 displayed on the hob control panel
- Hob ceases normal operation when the error appears
- Possible loss of heating function or shutdown
Possible Causes
- Open circuit in the temperature sensor (NTC) of the induction coil/module (medium)
How to Fix Error E16
DIY Fix Power cycle and check basic conditions
- Turn off the hob at the mains breaker or unplug it (if accessible).
- Wait 5–10 minutes for any internal capacitors to discharge.
- Restore power and see if the E16 code reappears.
Technician Only Inspect and replace temperature sensor/coil assembly
- Disconnect power and remove the induction hob from its installation location.
- Access the internal induction coil and associated NTC temperature sensor wiring.
- Measure the continuity/resistance of the NTC sensor; confirm open circuit.
- Replace the NTC sensor or induction coil assembly as required.
- Reassemble the hob and test operation to verify error resolution.
Parts needed: NTC temperature sensor for induction coil, Induction coil assembly (if integrated with sensor)
- The E16 code continues after a power cycle.
- There are signs of internal electrical damage (burnt smell, discoloration).
- Untrained user attempts to access internal components.
Next step
Choose the next step for E16
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Induction Heating Coil
Generates electromagnetic energy to heat pots and pans directly.
Model-compatible Induction Hob parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E16 error mean on beko induction hob?
E16 indicates a failure in the temperature sensor circuit, causing the hob to stop heating.
Can I fix beko induction hob E16 error myself?
Yes, try power cycling the hob by turning it off and on after a few minutes.
How much does it cost to fix E16 error?
Repair costs for E16 range from ¥10,000 to ¥40,000, depending on parts and labor.
When should I call a technician for E16?
Call a technician if the error persists after a power cycle or if you notice internal damage.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!