Bauknecht Dishwasher Error F06
⚡ Quick Answer: The Bauknecht dishwasher F06 error indicates a malfunction in the water intake system, preventing the dishwasher from filling properly. This may occur... ✅ DIY Fixable
What Does Error F06 Mean?
The Bauknecht dishwasher F06 error indicates a malfunction in the water intake system, preventing the dishwasher from filling properly. This may occur during the initial fill phase or shortly after starting a cycle, often resulting in unusual noises and a complete halt in the wash process. The primary issue is typically related to a faulty flow meter or water inlet valve, which can lead to inadequate water flow into the appliance.
Common Symptoms:
- Dishwasher does not fill with water or stops shortly after start
- Error appears immediately or during fill phase
- No wash cycle progression
Possible Causes
- Water intake / flow meter fault (medium)
- Possible motor/circulation pump problem (unverified) (low)
How to Fix Error F06
DIY Fix Check water supply and inlet
- Ensure the water tap supplying the dishwasher is fully open
- Inspect the inlet hose for kinks or blockages
- Clean the inlet hose filter if accessible
DIY Fix Reset dishwasher
- Turn off the dishwasher and unplug it or switch off at the circuit breaker
- Wait 1–2 minutes
- Restore power and attempt a normal wash cycle to clear errors
Technician Only Inspect/replace flow meter and related components
- Disconnect power and water supply to the unit
- Remove access panel to reach water intake/flow meter
- Test flow meter for correct operation and inspect associated wiring for damage
- Replace faulty flow meter or inlet valve as needed
Parts needed: flow meter assembly, water inlet valve
- If water supply checks and resets do not clear the error
- Visible leakage from inlet components
- Unusual noises during attempted fill
Next step
Choose the next step for F06
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 30W |
|---|---|
| component | Drain Pump Assembly |
| resistance | 10-20 ohms |
| part_number | Bauknecht 481231019137 |
| voltage_rating | 230V AC |
Common Questions
What does F06 error mean on bauknecht dishwasher?
The F06 error indicates a malfunction in the water intake system, preventing proper filling.
Can I fix bauknecht dishwasher F06 error myself?
Yes, check the water supply, inspect the inlet hose for blockages, and reset the dishwasher.
How much does it cost to fix F06 error?
Estimated repair cost is $50–$200 for parts, plus labor.
When should I call a technician for F06?
Call a technician if checks and resets do not resolve the error or if you notice visible leaks.
Sources & References
- Unofficial blog on Bauknecht F06 meaning (community)
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!