Bauknecht Dishwasher Error E4
⚡ Quick Answer: The Bauknecht dishwasher E4 error code indicates a water overflow condition, often triggered by water detection in the base tray or a malfunction in t... ✅ DIY Fixable
What Does Error E4 Mean?
The Bauknecht dishwasher E4 error code indicates a water overflow condition, often triggered by water detection in the base tray or a malfunction in the drainage system. Symptoms include the dishwasher stopping shortly after starting, water accumulating inside or beneath the machine, and premature cycle termination. This issue may also appear alongside other error codes, such as F6, which points to water inlet problems. Addressing the E4 error typically involves checking for standing water, inspecting drain components, and ensuring the float and sensors are functioning correctly.
Common Symptoms:
- Dishwasher stops operation soon after start displaying E4
- Water present in base beneath filter or visible water remaining inside
- Cycle prematurely ends due to perceived overflow or flooding
- Error may appear with additional codes like F6 indicating water inlet issues
Possible Causes
- Water detected in base tray causing overflow protection activation (medium)
- Drainage blockage or malfunction (drain pump, hose or filter) (medium)
- Incorrect water level detection due to faulty float or sensor (medium)
How to Fix Error E4
DIY Fix Basic Checks and Clearing Water
- Turn off and disconnect power to the dishwasher.
- Remove lower front panel and access base tray if visible; carefully remove standing water with absorbent cloths or towels.
- Check bottom of dishwasher under filters for water and remove it.
- Inspect visible drain filter and clean debris.
- Restart dishwasher to see if code clears.
DIY Fix Inspect Drain and Floating Components
- Inspect drain hose for kinks, blockages, or obstructions.
- Pull out and clean drain filters under the dishwasher bottom.
- Ensure float components move freely and are not obstructed by debris.
Technician Only Advanced Drain and Sensor Diagnostics
- Test drain pump operation and continuity with a multimeter.
- Examine float switch and water level sensors for proper operation; replace if defective.
- Inspect drain hose external connection at siphon and under sink for blockages.
- Verify flood detection circuit integrity and sensor harness connections.
Parts needed: Drain pump, Float switch / flood sensor, Drain hose, Water level sensor assembly
- After water removal and basic cleaning, E4 persists on re‑powering
- If internal components like pumps or sensors are not accessible or suspected defective
- Visible leaks or substantial water accumulation continues after troubleshooting
Next step
Choose the next step for E4
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Float Switch
Detects the maximum water level to prevent overflow and potential flooding.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 1800W |
|---|---|
| component | Float Switch |
| resistance | 5-10 ohms |
| part_number | Bauknecht 481227058000 |
| voltage_rating | 230V AC |
Common Questions
What does E4 error mean on Bauknecht dishwasher?
E4 indicates a water overflow condition due to detected water in the base or drainage issues.
Can I fix Bauknecht dishwasher E4 error myself?
Yes, you can perform basic checks, like removing standing water and inspecting the drain and float components.
How much does it cost to fix E4 error?
Repair costs for the E4 error typically range from $50 to $250+, depending on the parts needed.
When should I call a technician for E4?
Call a technician if the E4 error persists after basic cleaning or if internal components are suspected to be defective.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!