Bauknecht Dishwasher Error E2

⚡ Quick Answer: The Bauknecht dishwasher E2 error code indicates a drainage issue, preventing the appliance from effectively removing water during the wash cycle. Thi... ✅ DIY Fixable

What Does Error E2 Mean?

The Bauknecht dishwasher E2 error code indicates a drainage issue, preventing the appliance from effectively removing water during the wash cycle. This may manifest as water remaining in the tub after the wash or drain cycle, unusual humming sounds, and the dishwasher stopping mid-cycle near the drain phase. Common causes include a clogged drain filter or sump area, a blocked or kinked drain hose, or a malfunctioning drain pump.

Common Symptoms:

  • Dishwasher displays E2 error
  • Water remains in tub after wash/drain cycle
  • Dishwasher stops mid‑cycle at or near drain phase
  • Possible unusual sounds during attempted drain

Possible Causes

  • Clogged drain filter or sump area (medium)
  • Blocked or kinked drain hose (medium)
  • Drain pump malfunction or internal blockage (medium)

How to Fix Error E2

DIY Fix Check and Clean Drain Filter and Sump

  1. Turn off dishwasher and disconnect power
  2. Remove lower dish rack to access drain area
  3. Locate and remove drain filter assembly
  4. Rinse filter under warm water and clear debris
  5. Inspect sump below filter for trapped debris and remove
  6. Reinstall filter securely and run a short drain cycle

DIY Fix Inspect and Clear Drain Hose

  1. Turn off power and pull dishwasher slightly out (if comfortable)
  2. Locate drain hose from dishwasher to sink drain or disposal
  3. Check for visible kinks or bends and straighten them
  4. Disconnect hose and run water or blow through to check for clogs
  5. Reattach hose securely and test drain cycle

Technician Only Test/Replace Drain Pump

  1. Disconnect power and water supply
  2. Remove dishwasher access panels to reach pump
  3. Inspect pump impeller for blockage and test electrical function with multimeter
  4. Replace pump assembly if faulty

Parts needed: drain pump assembly

🛑 When to Call a Pro:
  • If error persists after basic cleaning and hose inspection
  • If drain pump shows electrical failure or impeller damage
  • If water leaks occur while attempting repairs
  • If you are not comfortable accessing internal components

Next step

Choose the next step for E2

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Drain Pump

Pumps waste water out of the appliance during the drain cycle.

Typical part-only price
$35 - $80
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Also check
RepairClinic

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Dishwasher parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dishwasher Cleaner and Descaler

Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.

View maintenance supply
Maintenance supply

Braided Dishwasher Inlet Hose

For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

wattage 30W
component Drain Pump
resistance 30-50 ohms
part_number Bauknecht 481227028303
voltage_rating 230V AC

Common Questions

What does E2 error mean on Bauknecht dishwasher?

The E2 error indicates a drainage issue, often leaving water in the tub and causing the cycle to stop.

Can I fix Bauknecht dishwasher E2 error myself?

Yes, you can check and clean the drain filter and inspect the drain hose for kinks.

How much does it cost to fix E2 error?

The estimated repair cost for fixing the E2 error ranges from ¥10,000 to ¥30,000, depending on parts and labor.

When should I call a technician for E2?

Call a technician if the error persists after cleaning or if you notice pump failure or leaks during repairs.

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!