Bauknecht Dishwasher Error E10

⚡ Quick Answer: The Bauknecht dishwasher E10 error indicates a water supply or inlet issue. This error often occurs when the dishwasher fails to receive sufficient wa... ✅ DIY Fixable

What Does Error E10 Mean?

The Bauknecht dishwasher E10 error indicates a water supply or inlet issue. This error often occurs when the dishwasher fails to receive sufficient water, preventing it from starting the wash cycle. Symptoms include the display showing E10, a persistent humming sound, and water not entering the machine at the expected pressure or volume. To resolve this, check the water tap and hose for blockages or kinks, and inspect the inlet hose filter for clogs.

Common Symptoms:

  • Dishwasher stops before starting wash cycle due to lack of sufficient water.
  • Water does not enter the machine at expected pressure or volume.
  • Display shows E10 and cycle does not proceed.

Possible Causes

  • Insufficient water supply / water inlet issue (medium)

How to Fix Error E10

DIY Fix Check basic water supply and connections

  1. Ensure the water tap supplying the dishwasher is fully open.
  2. Check that the water supply hose is not kinked or blocked.
  3. Inspect the inlet hose filter (at faucet and machine end) and clean if clogged.
  4. Reset the dishwasher by turning it off, waiting ~1 minute, then powering on again.

Technician Only Inspect water inlet components

  1. Verify correct water pressure at the inlet and test the water flow rate.
  2. Check the inlet valve for proper function; replace if defective.
  3. Examine sensors related to water detection and flow measurement for faults.
  4. Use manufacturer diagnostic tools to confirm lack of water entry is triggering E10.

Parts needed: Water inlet valve, Inlet hose and filters, Flow sensor (if present)

🛑 When to Call a Pro:
  • After basic water connection checks, if E10 persists.
  • If there is a suspected internal component failure (e.g., inlet valve or sensor).
  • If there are signs of water leakage or electrical issues when inspecting.

Next step

Choose the next step for E10

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Water Inlet Valve

Controls the flow of hot and cold water into the appliance.

Typical part-only price
$25 - $60
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Dishwasher parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dishwasher Cleaner and Descaler

Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.

View maintenance supply
Maintenance supply

Braided Dishwasher Inlet Hose

For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

wattage 30W
component Drain Pump
resistance 20-40 ohms
part_number Bauknecht 481231019710
voltage_rating 230V AC

Common Questions

What does E10 error mean on bauknecht dishwasher?

E10 error indicates a water supply issue, preventing the dishwasher from receiving sufficient water.

Can I fix bauknecht dishwasher E10 error myself?

Yes, check the water supply, hose connections, and clean the inlet hose filter.

How much does it cost to fix E10 error?

Estimated repair costs for E10 error range from €50 to €200.

When should I call a technician for E10?

Call a technician if the E10 error persists after checks or if you suspect internal component failure.

Sources & References

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!