Artusi Dishwasher Error E6

⚡ Quick Answer: The Artusi dishwasher E6 error code indicates a turbidity sensor malfunction, which measures water cleanliness. This error may cause the dishwasher to... ✅ DIY Fixable

What Does Error E6 Mean?

The Artusi dishwasher E6 error code indicates a turbidity sensor malfunction, which measures water cleanliness. This error may cause the dishwasher to halt its wash cycle and display the E6 code. Users may also notice unusual noises during operation as a sign of the issue. To resolve this, it is essential to check the condition of the filter and spray arms. If the error persists after basic troubleshooting, further inspection of the turbidity sensor and its connections is necessary.

Common Symptoms:

  • Dishwasher displays E6/E06 code on the panel
  • Possible interruption or halt of wash cycle when error appears

Possible Causes

  • Turbidity sensor malfunction (medium)

How to Fix Error E6

DIY Fix Basic inspection of dishwasher conditions

  1. Turn off the dishwasher and disconnect it from power.
  2. Check that filter and spray arms are clean and not obstructed.
  3. Restart the dishwasher to see if the error clears.

Technician Only Inspect and service turbidity sensor

  1. Test the turbidity sensor for correct signal and continuity.
  2. Inspect wiring harness and connectors for damage or corrosion.
  3. Replace the turbidity sensor assembly if confirmed faulty.

Parts needed: Turbidity sensor, Sensor wiring/connectors

🛑 When to Call a Pro:
  • If the error reappears after basic checks
  • If internal inspections reveal damaged wiring or sensor components
  • If you are uncomfortable performing electrical diagnostics

Next step

Choose the next step for E6

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Wiring Harness

Connects controls, sensors, motors, and other electrical components inside the appliance.

Typical part-only price
$20 - $120
DIY difficulty
Medium
Estimated time
30-90 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Dishwasher parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dishwasher Cleaner and Descaler

Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.

View maintenance supply
Maintenance supply

Braided Dishwasher Inlet Hose

For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

note The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering.
part_number None

Common Questions

What does E6 error mean on artusi dishwasher?

E6 indicates a turbidity sensor malfunction that affects water cleanliness measurement.

Can I fix artusi dishwasher E6 error myself?

Yes, perform basic checks by cleaning the filter and spray arms, and restart the dishwasher.

How much does it cost to fix E6 error?

The estimated repair cost ranges from ¥5,000 to ¥20,000, depending on the sensor and labor.

When should I call a technician for E6?

Call a technician if the error reappears after checks or if you find damaged wiring or discomfort with electrical diagnostics.

Data last verified: 2026-07-31

User Comments (0)

Share your experience or solution below.

Be the first to comment!