Artusi Dishwasher Error E2

⚡ Quick Answer: The Artusi dishwasher error E2 indicates a drainage issue where the appliance is unable to pump out water effectively. This can lead to symptoms such ... ✅ DIY Fixable

What Does Error E2 Mean?

The Artusi dishwasher error E2 indicates a drainage issue where the appliance is unable to pump out water effectively. This can lead to symptoms such as the dishwasher stopping mid-cycle, standing water in the tub, or prolonged drain cycles. Common causes include blockages in the drainage path, such as the filter, sump, or drain hose, and a faulty or jammed drain pump. Addressing these issues promptly can restore the dishwasher's performance.

Common Symptoms:

  • Dishwasher stops mid‑cycle with E2 displayed
  • Standing water in the bottom of the tub after a wash
  • Drain cycle appears to run too long or fails

Possible Causes

  • Blockage in drainage path (filter, sump, drain hose) (medium)
  • Faulty or jammed drain pump (medium)

How to Fix Error E2

DIY Fix Check and clean drainage filter and sump

  1. Turn off and unplug the dishwasher.
  2. Remove the lower rack to access the bottom of the tub.
  3. Locate the filter assembly and remove it.
  4. Rinse the filter under running water and clear debris.
  5. Clear any visible debris from the sump area.
  6. Reinstall the filter and rack, then restart the dishwasher.

DIY Fix Inspect and clear drain hose

  1. Turn off power to the dishwasher.
  2. Pull the dishwasher out if necessary to access the back.
  3. Check the drain hose for kinks or visible blockages.
  4. Straighten the hose and flush with water if possible.
  5. Reposition securely and test the dishwasher.

Technician Only Test and replace drain pump if faulty

  1. Disconnect the dishwasher from power.
  2. Access the base panel to reach the drain pump.
  3. Use a multimeter to test pump motor continuity.
  4. Remove and replace the drain pump if defective.
  5. Reassemble and test the dishwasher.

Parts needed: Drain pump assembly, Possible replacement hose or connectors

🛑 When to Call a Pro:
  • If water remains after cleaning filter and hose and E2 persists
  • If drain pump tests fail and replacement is needed
  • If there are signs of leaks or electrical failures

Next step

Choose the next step for E2

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Drain Pump

Pumps waste water out of the appliance during the drain cycle.

Typical part-only price
$35 - $80
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Also check
RepairClinic

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Dishwasher parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dishwasher Cleaner and Descaler

Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.

View maintenance supply
Maintenance supply

Braided Dishwasher Inlet Hose

For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

Tool Standard Toolkit
Type Electromechanical
Action Clear Blockage
Component Pump

Common Questions

What does E2 error mean on Artusi dishwasher?

E2 error indicates a drainage issue where the dishwasher cannot pump out water, leading to mid-cycle stops and standing water.

Can I fix Artusi dishwasher E2 error myself?

Yes, you can clean the drainage filter and inspect the drain hose for blockages to potentially resolve the E2 error.

How much does it cost to fix E2 error?

The estimated repair cost for the E2 error ranges from $80 to $200, including parts and labor, depending on your location.

When should I call a technician for E2?

Call a technician if water remains after cleaning the filter and hose, if the drain pump fails testing, or if you notice leaks or electrical issues.

Data last verified: 2026-07-22

User Comments (0)

Share your experience or solution below.

Be the first to comment!