Artusi Dishwasher Error E5

⚡ Quick Answer: The Artusi dishwasher error E5 indicates an overfill condition, suggesting that water levels have exceeded normal limits. This error often results in ... ✅ DIY Fixable

What Does Error E5 Mean?

The Artusi dishwasher error E5 indicates an overfill condition, suggesting that water levels have exceeded normal limits. This error often results in the dishwasher halting mid-cycle, accompanied by unusual sounds. The issue is typically caused by a malfunctioning float switch, water inlet valve, or overflow sensors, leading to excessive water intake. If you experience this error, it’s crucial to address the overflow promptly to prevent potential water damage.

Common Symptoms:

  • Dishwasher stops mid‑cycle when water level too high
  • Possible water in base pan / overflow indicator triggered

Possible Causes

  • Overfill detected due to float/level sensing or inlet valve malfunction (low)

How to Fix Error E5

DIY Fix Check water supply and restart

  1. Turn off the dishwasher and disconnect power.
  2. Ensure the water inlet tap is not over‑pressurising the machine.
  3. Wait a few minutes, then restore power and attempt a new cycle.

Technician Only Inspect float switch / inlet and base pan

  1. Disconnect power and remove access panels.
  2. Check float switch and overflow/level sensors for correct operation and no obstruction.
  3. Inspect water inlet valve for overfilling behaviour.
  4. Check base pan for water and possible leak paths.
  5. Test and replace faulty components as needed.

Parts needed: float/level switch, water inlet valve, overflow sensors

🛑 When to Call a Pro:
  • If water is visibly leaking or filling past normal levels
  • If you cannot safely access float or inlet components

Next step

Choose the next step for E5

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Water Inlet Valve

Controls the flow of hot and cold water into the appliance.

Typical part-only price
$25 - $60
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Dishwasher parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dishwasher Cleaner and Descaler

Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.

View maintenance supply
Maintenance supply

Braided Dishwasher Inlet Hose

For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

note The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering.
part_number None

Common Questions

What does E5 error mean on artusi dishwasher?

E5 error indicates an overfill condition in the dishwasher, stopping it mid-cycle.

Can I fix artusi dishwasher E5 error myself?

Yes, check the water supply, ensure no over-pressurization, and restart the machine.

How much does it cost to fix E5 error?

Repair costs for E5 error range from $50 to $200+, depending on parts and labor.

When should I call a technician for E5?

Call a technician if there's visible leaking or if you cannot safely access the float or inlet components.

Data last verified: 2026-07-31

User Comments (0)

Share your experience or solution below.

Be the first to comment!