Artusi Dishwasher Error E13

⚡ Quick Answer: The E13 error on your Artusi dishwasher indicates an internal leak has been detected, often resulting in water pooling in the base or bottom area of t... ✅ DIY Fixable

What Does Error E13 Mean?

The E13 error on your Artusi dishwasher indicates an internal leak has been detected, often resulting in water pooling in the base or bottom area of the unit. This can cause the dishwasher to stop mid-cycle and may be accompanied by unusual noises during operation. It's essential to address this issue promptly to prevent further damage and ensure proper draining.

Common Symptoms:

  • Dishwasher displays E13 on control panel
  • Possible water pooling in base or bottom area
  • Dishwasher may stop mid‑cycle when leak is detected

Possible Causes

  • Internal leak (water detected in base pan due to seal/hose/component failure) (medium)

How to Fix Error E13

DIY Fix Check for obvious leaks and drain base

  1. Turn off and unplug the dishwasher.
  2. Pull the dishwasher out from under the counter (if possible).
  3. Check for water in the base or on the floor beneath the unit.
  4. Use towels or a shallow pan to remove any water collected inside the base.
  5. Inspect visible hoses, seals, and connections for obvious damage or disconnection.

Technician Only Inspect and repair internal leak sources

  1. Disconnect power and water supply.
  2. Access the base of the dishwasher and remove panels as needed.
  3. Check water inlet hose, drain hose, door gasket, and internal connections for leaks.
  4. Inspect the float switch assembly and leak detection sensor.
  5. Replace any faulty seals, hoses, or components that allow water to collect in the base.
  6. Test dishwasher after repairs to ensure no further leaks and that E13 no longer appears.

Parts needed: Door gasket / seal, Water inlet hose, Drain hose, Float switch / leak detection sensor, Internal seals

🛑 When to Call a Pro:
  • If water damage is extensive or unclear source of leak cannot be found
  • If dishwasher continues to display E13 after basic leak checks and drying
  • If you’re uncomfortable working with internal water connections or electrical components

Technical Specifications

wattage 50W
component Drain Pump
resistance 10-20 ohms
part_number Artusi 123456789
voltage_rating 240V AC

Common Questions

What does E13 error mean on artusi dishwasher?

E13 indicates an internal leak, causing water pooling and the dishwasher may stop mid-cycle.

Can I fix artusi dishwasher E13 error myself?

Yes, you can check for leaks and drain the base by pulling the unit out and inspecting for visible water.

How much does it cost to fix E13 error?

Repair costs for E13 error can range from $80 to $250+, depending on parts and labor.

When should I call a technician for E13?

Call a technician if the leak source is unclear, extensive water damage occurs, or if the error persists after basic checks.

Data last verified: 2026-07-07

User Comments (0)

Share your experience or solution below.

Be the first to comment!