Artusi Dishwasher Error E11

⚡ Quick Answer: The Artusi dishwasher E11 error indicates a malfunction related to the flow meter, which is responsible for measuring the water entering the unit. Thi... ✅ DIY Fixable

What Does Error E11 Mean?

The Artusi dishwasher E11 error indicates a malfunction related to the flow meter, which is responsible for measuring the water entering the unit. This issue often leads to insufficient water detection, causing the wash cycle to halt and water to pool inside the dishwasher. Ensuring the water supply and hoses are in good condition is crucial for resolving this error.

Common Symptoms:

  • Dishwasher displays E11 on control panel
  • Possible irregular or insufficient water detected entering dishwasher (flow sensor issue)
  • Wash cycle may not proceed normally due to flow measurement error

Possible Causes

  • Flow meter malfunction or flow sensor irregular readings (medium)

How to Fix Error E11

DIY Fix Check water supply and hoses

  1. Ensure the water supply to the dishwasher is turned fully on.
  2. Inspect the inlet hose for kinks, bends, or visible blockages.
  3. Confirm there is adequate water pressure at the supply point.

Technician Only Inspect and test the flow meter sensor

  1. Disconnect power to the dishwasher.
  2. Access the area where the flow meter or inlet water sensor is located (typically integrated near the water inlet assembly).
  3. Visually inspect the sensor and wiring for corrosion, damage, or loose connectors.
  4. Test the flow meter with a multimeter or diagnostic tool according to service specifications.
  5. Replace the flow meter sensor if readings are out of spec or if the component is confirmed faulty.

Parts needed: flow meter sensor, inlet assembly wiring harness

🛑 When to Call a Pro:
  • If water supply checks and hose inspections do not clear the error.
  • If the technician-level diagnosis indicates faulty flow meter components.
  • If there are signs of internal water leakage or electrical issues when inspecting the appliance.

Next step

Choose the next step for E11

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Wiring Harness

Connects controls, sensors, motors, and other electrical components inside the appliance.

Typical part-only price
$20 - $120
DIY difficulty
Medium
Estimated time
30-90 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Dishwasher parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dishwasher Cleaner and Descaler

Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.

View maintenance supply
Maintenance supply

Braided Dishwasher Inlet Hose

For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

note The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering.
part_number None

Common Questions

What does E11 error mean on artusi dishwasher?

E11 indicates a flow meter malfunction, resulting in insufficient water detection and halting the wash cycle.

Can I fix artusi dishwasher E11 error myself?

Yes, check the water supply and hoses for kinks or blockages to help resolve the error.

How much does it cost to fix E11 error?

Estimated repair costs range from $50 to $200 for parts, plus labor depending on technician rates.

When should I call a technician for E11?

Call a technician if initial checks do not resolve the error or if internal issues are suspected.

Data last verified: 2026-07-31

User Comments (0)

Share your experience or solution below.

Be the first to comment!