Artusi Dishwasher Error E10

⚡ Quick Answer: The Artusi dishwasher E10 error indicates a malfunction in the drain pump, which may prevent the cycle from proceeding. This issue is often accompanie... ✅ DIY Fixable

What Does Error E10 Mean?

The Artusi dishwasher E10 error indicates a malfunction in the drain pump, which may prevent the cycle from proceeding. This issue is often accompanied by unusual noises during operation and may also be related to an empty or malfunctioning rinse aid dispenser. To resolve this, check the rinse aid level and refill if necessary. If the issue persists, consider power cycling the dishwasher to reset the control electronics.

Common Symptoms:

  • Error code E10 displayed on dishwasher control panel, cycle may not proceed or pauses

Possible Causes

  • Rinse aid dispenser empty or malfunctioning (low)

How to Fix Error E10

DIY Fix Check and refill rinse aid

  1. Open dishwasher door and locate the rinse aid dispenser
  2. Check level and refill with appropriate rinse aid if low
  3. Restart dishwasher to see if error clears

DIY Fix Power cycle the dishwasher

  1. Turn dishwasher off and unplug for >5 minutes to reset control electronics
  2. Reconnect power and restart a wash cycle to see if error clears

Technician Only Inspect rinse aid dispenser assembly and related wiring

  1. Remove access panel and inspect the dispense unit for blockage, mechanical failure, or wiring issues
  2. Test sensor continuity and dispenser motor operation
  3. Replace defective parts if necessary

Parts needed: Rinse aid dispenser unit, Associated sensors and wiring

🛑 When to Call a Pro:
  • If the error persists after basic user actions or the dishwasher shows signs of water leakage or electrical faults

Next step

Choose the next step for E10

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Detergent Dispenser

Releases detergent, bleach, or rinse aid at the correct moment in the cycle.

Typical part-only price
$30 - $70
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Dishwasher parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dishwasher Cleaner and Descaler

Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.

View maintenance supply
Maintenance supply

Braided Dishwasher Inlet Hose

For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

note The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering.
part_number None

Common Questions

What does E10 error mean on Artusi dishwasher?

E10 error indicates a drain pump malfunction, preventing the cycle from proceeding.

Can I fix Artusi dishwasher E10 error myself?

Yes, check and refill the rinse aid, then power cycle the dishwasher.

How much does it cost to fix E10 error?

Repair costs for the E10 error range from $50 to $200.

When should I call a technician for E10?

Call a technician if the error persists after your attempts or if there are signs of leakage or electrical faults.

Data last verified: 2026-07-31

User Comments (0)

Share your experience or solution below.

Be the first to comment!