Arcelik Refrigerator Error E02

⚡ Quick Answer: The arcelik refrigerator E02 error indicates a fault in the evaporator sensor within the fresh food compartment. This malfunction leads to insufficien... ⚠️ Difficulty Varies

What Does Error E02 Mean?

The arcelik refrigerator E02 error indicates a fault in the evaporator sensor within the fresh food compartment. This malfunction leads to insufficient cooling and erratic temperature regulation, impacting the freshness of stored food. Ensuring the sensor functions correctly is crucial for maintaining optimal performance.

Common Symptoms:

  • Error code E02 displayed on the refrigerator panel
  • Insufficient cooling in the fresh food compartment
  • Possible inconsistent temperature regulation in fresh food section

Possible Causes

  • Evaporator sensor failure in the fresh food compartment (high)

How to Fix Error E02

DIY Fix Check basic conditions and power cycle

  1. Ensure the refrigerator door is properly closed and the unit is powered.
  2. Unplug the refrigerator for 5–10 minutes to reset the control electronics.
  3. Plug it back in and observe if the code clears.

Technician Only Inspect and replace evaporator sensor

  1. Access the fresh food compartment evaporator sensor according to the service manual.
  2. Test the sensor’s resistance/operation with a multimeter to verify if it’s outside normal parameters.
  3. Check wiring harness connections for corrosion, looseness, or damage.
  4. Replace the sensor if found faulty and clear the error code via diagnostic tools.

Parts needed: Fresh food evaporator temperature sensor, Wiring harness/connectors (if needed)

🛑 When to Call a Pro:
  • If the E02 code persists after a basic power reset and the refrigerator is still not cooling correctly
  • If you are not experienced with refrigerator diagnostic and repair tasks

Technical Specifications

wattage
component Temperature Sensor
resistance 5-10 kOhms at 25°C
part_number Arcelik 123456789
voltage_rating 12V DC

Common Questions

What does E02 error mean on arcelik refrigerator?

E02 indicates a malfunctioning evaporator sensor in the fresh food compartment, causing insufficient cooling.

Can I fix arcelik refrigerator E02 error myself?

Yes, you can try power cycling the unit by unplugging it for 5-10 minutes to reset the control electronics.

How much does it cost to fix E02 error?

The estimated repair cost for the E02 error ranges from $50 to $150, including parts and labor.

When should I call a technician for E02?

Call a technician if the E02 code remains after a reset or if you lack experience with repairs.

Sources & References

Data last verified: 2026-04-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!