Arcelik Refrigerator Error E01

⚡ Quick Answer: The Arelik refrigerator error code E01 indicates a fault in the freezer compartment's evaporator temperature sensor. This malfunction can lead to inco... ⚠️ Difficulty Varies

What Does Error E01 Mean?

The Arelik refrigerator error code E01 indicates a fault in the freezer compartment's evaporator temperature sensor. This malfunction can lead to inconsistent cooling and incorrect temperature readings in the freezer section, compromising food preservation. If you see this error, it may be due to an open or short circuit in the sensor, necessitating diagnosis and possible replacement.

Common Symptoms:

  • The refrigerator/freezer displays error code E01/E1 on digital panel
  • Freezer compartment may not maintain proper cold temperature
  • Incorrect or unstable temperature readings in freezer section

Possible Causes

  • Freezer evaporator temperature sensor malfunction (open/short circuit or failed sensor) (high)

How to Fix Error E01

DIY Fix Basic checks and reset attempt

  1. Unplug the refrigerator or switch off power at the breaker for 5–10 minutes to reset the control board.
  2. After power is restored, observe whether the error code reappears on startup.

Technician Only Diagnose and replace freezer evaporator temperature sensor

  1. Use a multimeter to test the freezer evaporator temperature sensor for continuity and correct resistance values at expected temperatures.
  2. Check sensor wiring harness and connector for damage, corrosion, or disconnections.
  3. Replace the evaporator temperature sensor if readings are out of specification or if the sensor is confirmed faulty.
  4. Verify correct operation by powering the refrigerator and monitoring temperature readings.

Parts needed: Freezer evaporator temperature sensor, Wiring harness/connectors (if needed)

🛑 When to Call a Pro:
  • If the error code persists after power reset
  • If temperature in the freezer cannot be maintained
  • If the sensor wiring appears damaged or uncertain

Technical Specifications

wattage
component Temperature Sensor
resistance 5-10 kOhms at 25°C
part_number Beko 481231
voltage_rating 12V DC

Common Questions

What does E01 error mean on arcelik refrigerator?

E01 indicates a malfunction in the freezer evaporator temperature sensor, affecting cooling.

Can I fix arcelik refrigerator E01 error myself?

Yes, you can try resetting the refrigerator by unplugging it for 5-10 minutes.

How much does it cost to fix E01 error?

The estimated repair cost is medium, covering sensor replacement and technician labor.

When should I call a technician for E01?

Call a technician if the error persists after a reset or if temperature issues continue.

Sources & References

Data last verified: 2026-04-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!