Amana Washing Machine Error OFB

⚡ Quick Answer: The Amana Washing Machine error code OFB indicates an overflow condition, signaling that the load is out of balance. This often leads to the washer in... ✅ DIY Fixable

What Does Error OFB Mean?

The Amana Washing Machine error code OFB indicates an overflow condition, signaling that the load is out of balance. This often leads to the washer interrupting its spin cycle, excessive vibration, and a display showing OFB until the load is adjusted. Causes include uneven laundry distribution, overloaded or too small loads, and the washer not being level.

Common Symptoms:

  • Washer stops or interrupts spin cycle when attempting to balance load
  • Excessive vibration or shaking during spin
  • Display shows OFB and cycle doesn’t proceed until load is adjusted

Possible Causes

  • Uneven distribution of laundry inside the drum (high)
  • Overloaded or very small load interfering with balance (medium)
  • Washer not level or suspension component weakness (medium)

How to Fix Error OFB

DIY Fix Redistribute Load and Restart Cycle

  1. Pause the washer or cancel the cycle if possible
  2. Open the lid or door safely
  3. Evenly distribute laundry items around the drum
  4. Remove some items if overloaded
  5. Close the lid/door and restart the spin or desired cycle

DIY Fix Check Washer Level

  1. Use a carpenter’s level on top of the machine
  2. Adjust the leveling feet until the washer is stable and level on all four corners
  3. Test with a balanced load to confirm stability

Technician Only Inspect and Service Suspension Components

  1. Disconnect power and move washer to access internal suspension
  2. Inspect suspension rods, springs, and dampers for wear or breakage
  3. Replace any worn or broken suspension components
  4. Verify drum alignment and test balance via a spin cycle

Parts needed: Suspension rods, Springs or dampers

🛑 When to Call a Pro:
  • If OFB persists after multiple attempts to redistribute load and level washer
  • If unusual noises or signs of mechanical damage accompany the OFB error

Technical Specifications

wattage N/A
component Water Level Sensor
resistance 500-1500 ohms
part_number W10820036
voltage_rating 120V AC

Common Questions

What does OFB error mean on Amana Washing Machine?

The OFB error indicates an overflow condition due to an unbalanced load.

Can I fix Amana Washing Machine OFB error myself?

Yes, you can redistribute the load and ensure the washer is level.

How much does it cost to fix OFB error?

Repair costs for the OFB error range from $50 to $200, depending on service rates.

When should I call a technician for OFB?

Call a technician if the OFB error persists after adjustments or if there are unusual noises.

Sources & References

Data last verified: 2026-01-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!