Amana Washing Machine Error LOFL
⚡ Quick Answer: The LOFL error code on your Amana washing machine indicates a low water flow issue. This may prevent the washer from filling properly or completing cy... ✅ DIY Fixable
What Does Error LOFL Mean?
The LOFL error code on your Amana washing machine indicates a low water flow issue. This may prevent the washer from filling properly or completing cycles due to insufficient water levels. The error, also known as F8 E1, typically arises when the washer fails to achieve the required water level within the designated fill time, often caused by low water supply pressure or clogs in the inlet system.
Common Symptoms:
- Washer stops during fill and displays LO FL or F8 E1
- Door may lock and control become unresponsive during the error
- washer fails to fill to required level within the allotted time
Possible Causes
- Insufficient water supply flow/pressure (high)
- Clogged or restricted inlet hose screens (medium)
- Faulty water inlet valve (medium)
How to Fix Error LOFL
DIY Fix Check basic water supply and reset
- Ensure both hot and cold water supply valves are fully open
- Inspect water hoses for kinks and straighten them
- Disconnect hoses and verify water flow from the household supply
- Clean inlet hose screens if clogged
- Remove any tape sealing the drain hose allowing proper airflow (per official guidelines)
Technician Only Test and replace water inlet components
- Measure water pressure to ensure adequate supply
- Test water inlet valve operation and continuity with multimeter
- Inspect pressure switch and pressure sensing tube for blockage or damage
- Replace malfunctioning water inlet valve or pressure switch as needed
Parts needed: water inlet valve assembly, pressure switch/pressure sensor, inlet hose screens
- If water supply and hose checks do not resolve the error
- If internal components like inlet valve or pressure switches appear faulty
- If error persists after user-level troubleshooting
Next step
Choose the next step for LOFL
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Pressure Switch |
| resistance | 10-20 ohms |
| part_number | W10648032 |
| voltage_rating | 120V AC |
Common Questions
What does LOFL error mean on Amana washing machine?
The LOFL error indicates the washer detects low water flow or hasn't reached the correct water level.
Can I fix Amana washing machine LOFL error myself?
Yes, check the water supply, ensure valves are open, and inspect hoses for kinks.
How much does it cost to fix LOFL error?
Repair costs range from $50 to $200+, depending on parts and labor.
When should I call a technician for LOFL?
Call a technician if basic checks don’t resolve the issue or if internal components are faulty.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!