Amana Washing Machine Error LOC

⚡ Quick Answer: The LOC error on your Amana washing machine indicates that the Control Lock feature is activated, disabling all control inputs except for the POWER/ST... ✅ DIY Fixable

What Does Error LOC Mean?

The LOC error on your Amana washing machine indicates that the Control Lock feature is activated, disabling all control inputs except for the POWER/START button. This state is not a fault condition but prevents the door from opening or closing properly until deactivated. To resolve the issue, simply press and hold the Control Lock button for about 3 seconds, or power cycle the machine by unplugging it for a couple of minutes.

Common Symptoms:

  • Display shows “LOC” or “LC”
  • Control panel buttons unresponsive except possibly POWER/START
  • Occurs when attempting to use controls while control lock is engaged

Possible Causes

  • Control Lock intentionally or accidentally activated (high)

How to Fix Error LOC

DIY Fix Deactivate the Control Lock

  1. Locate the Control Lock or lock-symbol button on the washer’s control panel
  2. Press and hold the Control Lock button (or designated combo button) for about 3 seconds until the LOC indication clears
  3. Try operating the washer controls once the lock is deactivated

DIY Fix Power Cycle to Clear Lock if Needed

  1. Turn off and unplug the washer or switch off its circuit breaker
  2. Wait 1–2 minutes
  3. Restore power and check if the LOC indicator is cleared
  4. If necessary, repeat the deactivate Control Lock procedure

Technician Only Assist with Persistent Control Lock Issues

  1. Inspect control panel for stuck or unresponsive buttons
  2. Verify correct operation of the Control Lock switch/sensor
  3. Check for control board anomalies if the lock feature persists without user input

Parts needed: Control panel assembly/buttons, Control lock sensor or switch, Main control board (if required)

🛑 When to Call a Pro:
  • Control Lock won’t disengage after correct procedure and power cycle
  • Control panel buttons unresponsive beyond lock state
  • Display shows other error codes alongside LOC

Technical Specifications

wattage N/A
component Door Lock Assembly
resistance 0-5 ohms
part_number W10810403
voltage_rating 120V AC

Common Questions

What does LOC error mean on amana washing machine?

LOC indicates the Control Lock is activated, preventing control inputs.

Can I fix amana washing machine LOC error myself?

Yes, you can deactivate the Control Lock by holding the lock button for 3 seconds.

How much does it cost to fix LOC error?

Repair costs typically range from $50 to $300 depending on parts and service.

When should I call a technician for LOC?

Call a technician if the lock won't disengage or if other error codes appear.

Sources & References

Data last verified: 2026-01-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!