Amana Washing Machine Error INT
⚡ Quick Answer: The INT error on your Amana washing machine indicates a malfunction in the door lock mechanism, often caused by an interrupted or canceled wash cycle.... ✅ DIY Fixable
What Does Error INT Mean?
The INT error on your Amana washing machine indicates a malfunction in the door lock mechanism, often caused by an interrupted or canceled wash cycle. This may result in the display showing 'Int' during or after a cycle pause, with the washer potentially continuing to spin and drain for up to 20–30 minutes. To resolve this, you can clear the code and resume operation or reset the machine if the issue persists.
Common Symptoms:
- Display shows "Int" during or after a cycle pause or cancellation
- Washer may continue spinning and draining for up to ~20–30 minutes with the code shown
Possible Causes
- Interrupted or canceled wash cycle (high)
How to Fix Error INT
DIY Fix Clear the INT code and resume operation
- Press the Pause/Cancel button twice
- Press the Power button once
- Wait up to 20–30 minutes for the machine to finish draining and spinning if still active
DIY Fix Reset washer if INT persists
- Unplug the washer or disconnect power for approximately 1 minute
- Reconnect power
- Attempt to run a new cycle
Technician Only Service check after repeated INT errors
- Inspect control panel interface and button functionality
- Verify drain pump and spin system are operating normally
- Check for intermittent power disruptions that may prematurely cancel cycles
Parts needed: Drain pump assembly, Control board or panel components (if button faults are found)
- If the INT code persists after reset attempts
- If the washer fails to complete drain/spin within normal time repeatedly
- If there are additional error codes or abnormal noises during operation
Next step
Choose the next step for INT
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does INT error mean on Amana washing machine?
The INT error indicates a door lock malfunction, often due to an interrupted wash cycle.
Can I fix Amana washing machine INT error myself?
Yes, you can clear the INT code by pressing Pause/Cancel twice and Power once, or reset the machine if the issue persists.
How much does it cost to fix INT error?
Repair costs for the INT error can range from $50 to $200, depending on the specific issue and parts needed.
When should I call a technician for INT?
Call a technician if the INT code persists after reset attempts or if the washer fails to drain or spin properly.
Sources & References
- Int - Error Code - Product Help | Amana (official)
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!