Amana Washing Machine Error HC

⚡ Quick Answer: The Amana washing machine error code HC indicates a heating circuit failure, often resulting in improper water heating during cycles. This error typic... ✅ DIY Fixable

What Does Error HC Mean?

The Amana washing machine error code HC indicates a heating circuit failure, often resulting in improper water heating during cycles. This error typically arises when the hot and cold water inlet hoses are incorrectly connected, leading to inconsistent water temperatures, such as receiving cold water when warm is expected. It's crucial to verify that the hoses are properly attached to the corresponding inlets to resolve the issue effectively.

Common Symptoms:

  • Error appears at the end of a wash cycle
  • Water temperature is inconsistent with cycle selection (e.g., cold when warm is expected)

Possible Causes

  • Hoses reversed at installation (high)
  • Household plumbing mislabeled or cross-connected (medium)

How to Fix Error HC

DIY Fix Verify and correct hose connections

  1. Turn off the water supply to the washer.
  2. At the back of the washer, check that the hot water hose (often red or marked H) is connected to the washer’s hot water inlet and the cold hose (often blue or marked C) is connected to the cold inlet.
  3. If they are reversed, disconnect and swap the hoses so hot goes to hot and cold goes to cold.
  4. Turn the water supply back on and run a wash cycle to confirm the error code no longer appears.

Technician Only Check household plumbing configuration

  1. Inspect the household hot and cold supply valves to ensure they are correctly labeled and not cross-connected internally.
  2. Use a test method (e.g., run water into a container before connecting to washer) to confirm temperature matches valve labeling.
  3. If household plumbing is mis-labeled or incorrectly configured, correct at the source or advise homeowner to contact a plumber.
🛑 When to Call a Pro:
  • If the error persists after verifying hose connections and household plumbing.
  • If water temperature sensors or inlet valve hardware are suspected to be malfunctioning (requires diagnostic tools).

Technical Specifications

wattage 1000W
component Heating Element
resistance 10-30 ohms
part_number W10730972
voltage_rating 120V AC

Common Questions

What does HC error mean on Amana washing machine?

HC error indicates a heating circuit failure and often results in inconsistent water temperatures.

Can I fix Amana washing machine HC error myself?

Yes, you can verify and correct hose connections by swapping the hot and cold water hoses.

How much does it cost to fix HC error?

Repair costs vary based on model and region; check with local service providers for estimates.

When should I call a technician for HC?

Call a technician if the error persists after checking hoses or if you suspect sensor malfunctions.

Sources & References

Data last verified: 2026-01-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!