Amana Washing Machine Error DRN

⚡ Quick Answer: The Amana washing machine DRN error indicates a drainage issue, typically signaled by the washer taking longer than usual to drain water. This problem... ✅ DIY Fixable

What Does Error DRN Mean?

The Amana washing machine DRN error indicates a drainage issue, typically signaled by the washer taking longer than usual to drain water. This problem may manifest as unusual sounds during the spin cycle or the machine pausing without progressing past the drain phase. Common causes include an obstruction in the drain hose or a malfunctioning drain pump. Addressing these issues promptly can prevent further complications.

Common Symptoms:

  • Washer displays DRN on the control panel
  • Drain cycle takes significantly longer than normal
  • Washer may pause or not advance past drain phase

Possible Causes

  • Drain hose obstruction or improper installation (high)
  • Drain pump not able to effectively expel water (medium)

How to Fix Error DRN

DIY Fix Check and clear drain hose

  1. Unplug the washer from power.
  2. Inspect the drain hose for kinks, sharp bends, or visible blockages.
  3. Disconnect the drain hose and check for obstructions inside the hose.
  4. Reinstall the hose ensuring it is not inserted too far into the standpipe and not above recommended height (typically >36" from floor per Amana guidelines).
  5. Plug in and run a drain/spin cycle to verify if error clears.

Technician Only Inspect and test drain pump assembly

  1. Disconnect the washer from power and water.
  2. Remove access panels to reach the drain pump.
  3. Visually inspect and manually spin the pump impeller to check for obstruction or damage.
  4. Test the pump electrically with a multimeter to verify continuity.
  5. Replace the drain pump if it fails to operate properly or shows electrical fault.

Parts needed: drain pump assembly, hose clamps

🛑 When to Call a Pro:
  • Water continues to remain after attempting to clear hose and reset washer
  • Unusual noises (grinding) from pump area indicating potential motor/pump failure
  • Error persists after basic user-level troubleshooting

Technical Specifications

wattage 60W
component Drain Pump
resistance 10-30 ohms
part_number W10605459
voltage_rating 120V AC

Common Questions

What does DRN error mean on amana washing machine?

DRN indicates a drainage issue; the washer takes too long to drain water.

Can I fix amana washing machine DRN error myself?

Yes, check and clear the drain hose for blockages.

How much does it cost to fix DRN error?

Repair costs range from $60 to $200 for parts, depending on the model.

When should I call a technician for DRN?

Call if water remains after troubleshooting, or if you hear grinding noises.

Sources & References

Data last verified: 2026-01-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!