Amana Refrigerator Error PO
⚡ Quick Answer: The Amana Refrigerator PO error signifies a power outage detection, indicating that the appliance has sensed an interruption in its power supply. This... ✅ DIY Fixable
What Does Error PO Mean?
The Amana Refrigerator PO error signifies a power outage detection, indicating that the appliance has sensed an interruption in its power supply. This may cause the freezer temperature to rise, accompanied by an audible alert tone and the control panel displaying 'PO'. To resolve this, ensure that the refrigerator is receiving stable power and follow the reset instructions specific to your model.
Common Symptoms:
- Control panel displays "PO"
- Audible alert tone (typically three beeps)
- Freezer temperature may be elevated after power interruption
Possible Causes
- Recent power interruption or outage (high)
How to Fix Error PO
DIY Fix Acknowledge and clear the PO error
- Ensure refrigerator has stable power (check plug, breaker, GFCI).
- Press the "Confirm" option or hold the Alarm Reset/Measured Fill button until PO clears, per your model instructions.
Technician Only Verify power stability and performance after outage
- Confirm outlet power stability with a meter if needed.
- Inspect refrigerator power connection and breaker/GFCI integrity.
- Check freezer compartment temperature and confirm proper cooling cycle resumes.
- PO does not clear after acknowledging and fridge isn’t cooling normally
- Frequent PO errors without obvious power issues suggests control board or sensor problems
Next step
Choose the next step for PO
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Compressor
Compresses refrigerant within the sealed cooling system and requires specialized service equipment.
- Typical part-only price
- $180 - $600
- DIY difficulty
- Hard
- Estimated time
- 120-240 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Condenser Coil Assembly
Releases heat from the refrigerant circuit and must match the appliance's sealed-system design.
Model-compatible Refrigerator parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Refrigerator Condenser Coil Brush
For routine cleaning of accessible condenser areas where the manufacturer permits it. It does not repair a sealed-system or compressor fault.
Model-Compatible Refrigerator Water Filter
A routine replacement item on models with a water filter. Match the complete appliance model and existing filter number before ordering.
Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 200W |
|---|---|
| component | Compressor |
| resistance | 3-5 ohms |
| part_number | W10309976 |
| voltage_rating | 120V AC |
Common Questions
What does PO error mean on Amana Refrigerator?
The PO error indicates a power outage detection, causing the freezer temperature to rise.
Can I fix Amana Refrigerator PO error myself?
Yes, acknowledge the error and ensure stable power supply, then reset the error using your model's instructions.
How much does it cost to fix PO error?
The estimated repair cost for the PO error ranges from $0 to $100.
When should I call a technician for PO?
Call a technician if the PO error doesn't clear or if your fridge isn't cooling properly.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!