Amana Dishwasher Error F8E4

⚡ Quick Answer: The Amana Dishwasher F8E4 error code indicates a drainage issue, typically caused by water detected in the drip tray or a malfunctioning float switch.... ✅ DIY Fixable

What Does Error F8E4 Mean?

The Amana Dishwasher F8E4 error code indicates a drainage issue, typically caused by water detected in the drip tray or a malfunctioning float switch. This can lead to water pooling at the bottom of the dishwasher and may be accompanied by a humming sound. It's important to address this error promptly to restore normal operation and prevent further damage.

Common Symptoms:

  • Dishwasher displays F8E4 code
  • Possible water seen in drip tray under dishwasher
  • Dishwasher may be blocked from normal operation until code is cleared
  • Code may appear after installation or water issues

Possible Causes

  • Float switch triggered due to water in the drip tray or improper float connection (high)
  • Improper installation or water supply connection leading to float activation (high)

How to Fix Error F8E4

DIY Fix Check for water in drip tray and reset code

  1. Open dishwasher door and power off
  2. Check under dishwasher for water in the drip tray
  3. If water present, evacuate water from drip tray
  4. Ensure float inside drip tray moves freely
  5. Press Cancel once to silence alarm and again to clear code per Amana guidance

Technician Only Inspect float switch and water supply installation

  1. Disconnect power to dishwasher
  2. Remove access panel and inspect float switch wiring and connection
  3. Verify water supply hose routing and fittings per installation instructions
  4. Test float switch continuity and replace if defective
  5. Check for leaks causing water in drip tray and repair as needed

Parts needed: Float switch, Float assembly/drip tray, Water supply hose/fittings

🛑 When to Call a Pro:
  • If water leaks continue after float switch checks
  • If code returns after recommended fixes
  • If internal leaks or wiring faults are suspected

Technical Specifications

wattage 60W
component Drain Pump
resistance 10-20 ohms
part_number W10822610
voltage_rating 120V AC

Common Questions

What does F8E4 error mean on Amana Dishwasher?

F8E4 indicates a drainage issue related to water detected in the drip tray or float switch malfunction.

Can I fix Amana Dishwasher F8E4 error myself?

Yes, check for water in the drip tray and reset the code by turning off the power.

How much does it cost to fix F8E4 error?

Estimated repair costs range from $50 to $200 depending on the issue.

When should I call a technician for F8E4?

Call a technician if leaks persist after checking the float switch or if the code keeps returning.

Sources & References

Data last verified: 2026-01-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!