Amana Dishwasher Error F13
⚡ Quick Answer: The Amana dishwasher F13 error indicates a main control board failure, often resulting in the appliance stopping mid-cycle, displaying the error, and ... ⚠️ Difficulty Varies
What Does Error F13 Mean?
The Amana dishwasher F13 error indicates a main control board failure, often resulting in the appliance stopping mid-cycle, displaying the error, and potentially producing a humming noise. This error typically signifies a communication issue within the dishwasher's control electronics, requiring inspection and possible replacement of the control board.
Common Symptoms:
- Dishwasher stops mid-cycle and displays F13
- Control panel unresponsive or erratic behavior
Possible Causes
- Faulty main control board (medium)
How to Fix Error F13
DIY Fix Power reset and basic inspection
- Turn off power to the dishwasher (unplug or shut off breaker).
- Wait 5–10 minutes and restore power to see if the error clears.
- Visually inspect accessible wiring connections for obvious loose or damaged wires.
Technician Only Diagnose and replace main control board
- Confirm F13 error persists after reset.
- Use diagnostic tools to verify communication and voltage on control board.
- Replace main control board with manufacturer-specified part if confirmed faulty.
- Test dishwasher operation through full cycle.
Parts needed: Main control board (PCB), Possible associated wiring harnesses
- If the F13 error returns after a power reset.
- If there are signs of burned components or electrical smell inside the dishwasher.
- If the user is not comfortable accessing internal electronics.
Next step
Choose the next step for F13
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 60W |
|---|---|
| component | Drain Pump |
| resistance | 10-30 ohms |
| part_number | W10536347 |
| voltage_rating | 120V AC |
Common Questions
What does F13 error mean on amana dishwasher?
F13 indicates a main control board failure, stopping the dishwasher mid-cycle and causing erratic control panel behavior.
Can I fix amana dishwasher F13 error myself?
Yes, you can try a power reset and inspect wiring connections, but further issues may require professional help.
How much does it cost to fix F13 error?
The estimated repair cost for the F13 error ranges from $150 to $400, depending on parts and labor.
When should I call a technician for F13?
Call a technician if the F13 error persists after a reset, if you notice burnt components, or if you're uncomfortable with repairs.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!