Amana Dishwasher Error F11

⚡ Quick Answer: The Amana dishwasher F11 error indicates a malfunction in the wash or drain pump, causing improper drainage and resulting in standing water inside the... ✅ DIY Fixable

What Does Error F11 Mean?

The Amana dishwasher F11 error indicates a malfunction in the wash or drain pump, causing improper drainage and resulting in standing water inside the unit. This issue can halt the wash cycle and may require immediate attention to prevent further complications.

Common Symptoms:

  • Cycle stops mid‑wash
  • Dishwasher not draining water
  • Water pooling at bottom of tub
  • Error displayed immediately after start or mid‑cycle

Possible Causes

  • Wash pump or drain pump malfunction (medium)

How to Fix Error F11

DIY Fix Basic inspection and cleaning

  1. Turn off and disconnect power to dishwasher.
  2. Remove and clean filters, remove debris from sump area.
  3. Check drain hose for kinks or obstruction.
  4. Run a short cycle to see if error clears after cleaning.

Technician Only Inspect/replace pump assembly

  1. Disconnect dishwasher from power and water supply.
  2. Remove toe kick and access drain/circulation pump assembly.
  3. Inspect pump impeller for damage and free rotation.
  4. Test pump motor continuity and operation.
  5. Replace pump if defective.

Parts needed: drain/wash pump assembly, pump impeller

🛑 When to Call a Pro:
  • User cleaning does not resolve error
  • Unusual noises during pump operation
  • Visible damage to pump or wiring

Next step

Choose the next step for F11

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Dishwasher Circulation Pump

Circulates pressurized water through the dishwasher spray arms during the wash cycle.

Typical part-only price
$90 - $220
DIY difficulty
Hard
Estimated time
60-120 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Dishwasher parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dishwasher Cleaner and Descaler

Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.

View maintenance supply
Maintenance supply

Braided Dishwasher Inlet Hose

For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

note The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering.
part_number None

Common Questions

What does F11 error mean on amana dishwasher?

F11 indicates a wash or drain pump malfunction, causing drainage issues and standing water.

Can I fix amana dishwasher F11 error myself?

Yes, you can inspect and clean filters, check for debris, and ensure the drain hose is clear.

How much does it cost to fix F11 error?

Repair costs range from $80 to $250 for parts, plus labor.

When should I call a technician for F11?

Call a technician if cleaning does not help, if you hear unusual noises, or see visible damage.

Data last verified: 2026-07-31

User Comments (0)

Share your experience or solution below.

Be the first to comment!