Amana Dishwasher Error F10

⚡ Quick Answer: The Amana dishwasher error F10 signifies a malfunction in the heating element circuit, which is critical for heating water during wash and dry cycles.... ✅ DIY Fixable

What Does Error F10 Mean?

The Amana dishwasher error F10 signifies a malfunction in the heating element circuit, which is critical for heating water during wash and dry cycles. This error typically occurs when the control system detects an anomaly in the heating element's operation. Users may notice the dishwasher stopping mid-cycle, poor heating or drying performance, and potential error light patterns indicating a heating fault.

Common Symptoms:

  • Dishwasher stops mid-cycle with F10 displayed
  • Poor heating or drying performance
  • Potential error light pattern associated with heating fault

Possible Causes

  • Heating element circuit fault (medium)

How to Fix Error F10

DIY Fix Basic checks and reset

  1. Turn off the dishwasher and disconnect power (unplug or switch off breaker).
  2. Visually inspect the heating element for obvious damage.
  3. Restore power and run a test cycle to see if F10 reoccurs.

Technician Only Diagnose and test heating element circuit

  1. Use a multimeter to check continuity of the heating element.
  2. Inspect wiring and connectors to/from the heating element for continuity and secure connections.
  3. Replace the heating element if continuity is absent or if physical damage is evident.

Parts needed: heating element, wiring harness/connectors

🛑 When to Call a Pro:
  • Error remains after basic reset and inspection
  • Dishwasher exhibits additional faults like leaks, smoke, or electrical burning smell

Technical Specifications

wattage 60W
component Drain Pump Assembly
resistance 10-30 ohms
part_number W10712395
voltage_rating 120V AC

Common Questions

What does F10 error mean on amana dishwasher?

F10 indicates a malfunction in the heating element circuit, affecting wash and dry performance.

Can I fix amana dishwasher F10 error myself?

Yes, you can perform basic checks, reset the dishwasher, and inspect the heating element for damage.

How much does it cost to fix F10 error?

Repair costs range from $50 to $200 for parts, plus labor.

When should I call a technician for F10?

Call a technician if the error persists after a reset or if there are additional issues like leaks or burning smells.

Sources & References

Data last verified: 2026-01-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!