Amana Dishwasher Error F08
⚡ Quick Answer: The Amana dishwasher F08 error code indicates a temperature timeout fault, meaning the heating system failed to reach the expected temperature during ... ✅ DIY Fixable
What Does Error F08 Mean?
The Amana dishwasher F08 error code indicates a temperature timeout fault, meaning the heating system failed to reach the expected temperature during the wash cycle. This issue often results in incomplete cycles and may cause water not to drain properly. Possible causes include a malfunctioning heating element or thermostat, which require inspection and potential replacement.
Common Symptoms:
- Dishwasher displays F08 during or shortly after wash cycle heating phase
- Cycle may stop or not complete if required temperature isn’t reached
Possible Causes
- Heating element not reaching required temperature (medium)
How to Fix Error F08
DIY Fix Basic checks before service
- Turn off and safely disconnect power to the dishwasher.
- Ensure dishwasher is filled with water to expected level at start of heating phase.
- Check for obvious water supply issues (kinked hose, cold supply).
Technician Only Inspect heating system
- Test the heating element continuity and resistance with a multimeter.
- Inspect thermostat/temperature sensor function in context of cycle.
- Verify control board outputs for the heating circuit.
Parts needed: Heating element, Thermostat/temperature sensor, Control board (if needed)
- If F08 returns after basic checks
- If heating element tests open or thermostat/sensor is out of spec
Next step
Choose the next step for F08
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Heating Element
Heats the water or air inside the appliance to the required temperature.
- Typical part-only price
- $40 - $95
- DIY difficulty
- Medium
- Estimated time
- 30-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Thermostat
Regulates temperature by turning the heating or cooling system on or off.
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 60W |
|---|---|
| component | Drain Pump |
| resistance | 10-30 ohms |
| part_number | W10537869 |
| voltage_rating | 120V AC |
Common Questions
What does F08 error mean on Amana dishwasher?
F08 indicates a temperature timeout fault during the wash cycle, preventing proper operation.
Can I fix Amana dishwasher F08 error myself?
Yes, you can check the water supply and ensure the dishwasher is powered off before inspecting basic issues.
How much does it cost to fix F08 error?
Repair costs can range from medium to high, depending on the part that needs replacement.
When should I call a technician for F08?
Call a technician if the F08 error persists after your checks or if parts require testing.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!