Amana Dishwasher Error F07

⚡ Quick Answer: The Amana dishwasher error F07 indicates a malfunction in the water turbine, leading to poor or no water circulation during wash cycles. This issue of... ✅ DIY Fixable

What Does Error F07 Mean?

The Amana dishwasher error F07 indicates a malfunction in the water turbine, leading to poor or no water circulation during wash cycles. This issue often results in dishes not being cleaned effectively and may be accompanied by unusual noises. To address this, inspect the drain pump area for debris or blockages before considering further repairs.

Common Symptoms:

  • Error code F07 displayed on control panel
  • Poor or no water circulation during wash cycles
  • Dishes not cleaned effectively

Possible Causes

  • Water turbine damage or failure (medium)

How to Fix Error F07

DIY Fix Inspect for debris and reset

  1. Turn off the dishwasher and disconnect power.
  2. Open the dishwasher and remove the lower access panel.
  3. Visually inspect the water turbine area for debris, foreign objects, or blockages.
  4. Clear any visible obstructions carefully.
  5. Reconnect power and run a short cycle to see if the code clears.

Technician Only Replace or service the water turbine / circulation pump assembly

  1. Disconnect power and water supply.
  2. Remove the dishwasher lower access panel and locate the water turbine / circulation pump assembly.
  3. Test the circulation pump and turbine for mechanical or electrical failure.
  4. Replace the damaged turbine or complete pump assembly with OEM parts if necessary.
  5. Reassemble and test dishwasher operation.

Parts needed: Water turbine, Circulation pump assembly, Seals/gaskets as required

🛑 When to Call a Pro:
  • If the error code persists after clearing debris and resetting
  • If you are uncomfortable accessing internal components
  • If water leakage or unusual noises accompany the error

Next step

Choose the next step for F07

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Dishwasher Circulation Pump

Circulates pressurized water through the dishwasher spray arms during the wash cycle.

Typical part-only price
$90 - $220
DIY difficulty
Hard
Estimated time
60-120 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Dishwasher parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dishwasher Cleaner and Descaler

Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.

View maintenance supply
Maintenance supply

Braided Dishwasher Inlet Hose

For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

wattage 60W
component Drain Pump
resistance 10-20 ohms
part_number W10536347
voltage_rating 120V AC

Common Questions

What does F07 error mean on amana dishwasher?

F07 indicates a malfunction in the water turbine, causing poor water circulation and ineffective cleaning.

Can I fix amana dishwasher F07 error myself?

Yes, you can inspect for debris and reset the dishwasher by turning off the power and checking the water turbine area.

How much does it cost to fix F07 error?

The estimated repair cost for the F07 error ranges from $80 to $250, depending on parts and labor.

When should I call a technician for F07?

Call a technician if the error persists after cleaning, if you're uncomfortable with repairs, or if there are unusual noises or leaks.

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!