Amana Dishwasher Error F06

⚡ Quick Answer: The Amana dishwasher F06 error indicates a water fill timeout, where the dishwasher fails to fill with water within the expected time. This may cause ... ✅ DIY Fixable

What Does Error F06 Mean?

The Amana dishwasher F06 error indicates a water fill timeout, where the dishwasher fails to fill with water within the expected time. This may cause the unit to stop early in its cycle and can be accompanied by unusual noises. Common causes include insufficient water entering the tub, potentially due to a malfunctioning water inlet valve or water level sensor.

Common Symptoms:

  • Dishwasher stops early in cycle
  • Dishwasher does not fill with water in a normal time period
  • Indicator lights correspond with F06 error display

Possible Causes

  • Water fill timeout due to insufficient water entering tub (medium)
  • Possible water level sensor or inlet issue (low)

How to Fix Error F06

DIY Fix Check water supply and reset dishwasher

  1. Ensure the household water supply valve to the dishwasher is fully open
  2. Check that the water inlet hose is not kinked or blocked
  3. Turn off power to the dishwasher at the mains or unplug it for 5–10 minutes to attempt a reset
  4. Restore power and run a short cycle to see if the error recurs

Technician Only Inspect water inlet and sensors

  1. Disconnect dishwasher from power
  2. Test water inlet valve for proper operation and replace if faulty
  3. Verify water level sensor or float switch operation
  4. Check wiring/connectors to inlet valve and control board for continuity and signs of damage

Parts needed: Water inlet valve, Water level sensor/float switch, Relevant wiring harness

🛑 When to Call a Pro:
  • Error persists after basic water supply checks and reset
  • Signs of water leaks or electrical issues
  • Unusual noises or repeated failures

Technical Specifications

wattage 60W
component Drain Pump Assembly
resistance 10-20 ohms
part_number W10882850
voltage_rating 120V AC

Common Questions

What does F06 error mean on amana dishwasher?

The F06 error means the dishwasher has a water fill timeout, causing it to stop early in the cycle.

Can I fix amana dishwasher F06 error myself?

Yes, you can check the water supply, ensure the inlet hose is not blocked, and reset the dishwasher.

How much does it cost to fix F06 error?

Repair costs range from $80 to $300+, depending on parts and service fees.

When should I call a technician for F06?

Call a technician if the error persists after checks, or if you notice leaks or unusual noises.

Data last verified: 2026-01-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!