Amana Dishwasher Error F02

⚡ Quick Answer: The Amana dishwasher F02 error indicates a water fill or solenoid valve failure. This error often prevents the dishwasher from filling with water at t... ✅ DIY Fixable

What Does Error F02 Mean?

The Amana dishwasher F02 error indicates a water fill or solenoid valve failure. This error often prevents the dishwasher from filling with water at the start of a cycle and may cause the cycle to stop prematurely. Users may also notice unusual noises during operation. To resolve this issue, checking the water supply and resetting the dishwasher can be useful initial steps.

Common Symptoms:

  • Dishwasher fails to fill with water at start
  • Cycle stops early with error code displayed

Possible Causes

  • Water fill solenoid valve failure or water inlet fill fault (medium)

How to Fix Error F02

DIY Fix Check water supply and simple resets

  1. Ensure the dishwasher’s water supply valve is fully open.
  2. Turn off power to the dishwasher at the breaker or unplug for 1–2 minutes to reset controls.
  3. Restart the dishwasher to see if the code returns.

Technician Only Inspect and replace water inlet/solenoid valve

  1. Disconnect dishwasher from power.
  2. Access the water inlet assembly at the base of the dishwasher.
  3. Test the water fill solenoid valve for continuity and proper operation.
  4. Replace the valve if defective and reassemble.
  5. Test run the dishwasher to confirm fault has cleared.

Parts needed: Water inlet/solenoid valve

🛑 When to Call a Pro:
  • If F02 error persists after simple resets and checking water supply
  • If water inlet valve is suspected defective or internal diagnostics are needed

Next step

Choose the next step for F02

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Drain Pump

Pumps waste water out of the appliance during the drain cycle.

Typical part-only price
$35 - $80
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Also check
RepairClinic

Other components that may be involved

Check these only if your diagnosis points to them.

Possible related component

Drain Hose

Carries waste water from the drain pump to your home's standpipe or sink drain.

$15 - $30 · Easy · 15-30 mins

Check fit & price

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 60W
component Drain Pump
resistance 10-30 ohms
part_number W10712395
voltage_rating 120V AC

Common Questions

What does F02 error mean on Amana dishwasher?

F02 means a water fill or solenoid valve failure, causing the dishwasher not to fill with water.

Can I fix Amana dishwasher F02 error myself?

Yes, check the water supply and reset the dishwasher to see if the error persists.

How much does it cost to fix F02 error?

Repair costs range from $50 to $150 for parts, plus labor.

When should I call a technician for F02?

Call a technician if the error persists after resetting and checking the water supply.

Data last verified: 2026-01-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!