Aeg Dishwasher Error iF0

⚡ Quick Answer: The AEG dishwasher iF0 error indicates a drainage issue, specifically a water fill time error. This occurs when the dishwasher cannot fill with water ... ✅ DIY Fixable

What Does Error iF0 Mean?

The AEG dishwasher iF0 error indicates a drainage issue, specifically a water fill time error. This occurs when the dishwasher cannot fill with water to the required level within the expected time. Symptoms include the appliance stopping mid-cycle, failing to start the wash cycle, and potential ongoing operation of the drain pump. Common causes are blocked water supply, restricted inlet hose, or malfunctioning inlet valve.

Common Symptoms:

  • Dishwasher stops and displays iF0 error
  • Dishwasher may fail to start wash cycle due to water not filling
  • Possible ongoing drain pump operation (reported in some community repair contexts)

Possible Causes

  • Water inlet/fill issue (insufficient water within fill time) (high)
  • Restricted or blocked water supply (valve/screen/hose) (medium)

How to Fix Error iF0

DIY Fix Basic checks for iF0 error on AEG dishwasher

  1. Turn off and unplug the dishwasher or switch off power at the fuse panel
  2. Ensure the water supply tap feeding the dishwasher is fully open
  3. Check the inlet hose is not kinked, twisted, or crushed
  4. Inspect and clean the inlet hose filter/screen at the tap connection
  5. Plug in and try restarting a wash cycle

Technician Only Technician-level diagnosis for persistent iF0

  1. Measure water pressure at inlet to verify adequate supply
  2. Test the inlet valve for proper operation and replace if stuck or faulty
  3. Check pressure sensor/level detection components for faults
  4. Inspect and clean the internal pressure chamber/air trap and associated tubing
  5. Verify no underlying issues with water level detection circuitry

Parts needed: Inlet water valve, Pressure/level sensor, Inlet hose and filter screen

🛑 When to Call a Pro:
  • If error persists after all recommended user-level checks
  • If water supply pressure is inadequate and cannot be resolved
  • If internal components such as inlet valve or pressure sensor are suspected faulty

Technical Specifications

wattage 30W
component Drain Pump
resistance 10-20 ohms
part_number AEG 124000000
voltage_rating 230V AC

Common Questions

What does iF0 error mean on AEG dishwasher?

The iF0 error indicates a drainage issue where the dishwasher fails to fill with water in the required time.

Can I fix AEG dishwasher iF0 error myself?

Yes, you can check the water supply, ensure the inlet hose is not kinked, and confirm the water tap is open.

How much does it cost to fix iF0 error?

Repair costs for the iF0 error typically range from $75 to $250+, depending on parts and labor.

When should I call a technician for iF0?

Call a technician if the error persists after user checks or if you suspect faulty internal components.

Sources & References

Data last verified: 2026-03-13

User Comments (0)

Share your experience or solution below.

Be the first to comment!