Aeg Dishwasher Error iD0

⚡ Quick Answer: The AEG dishwasher error code iD0 indicates a heating issue, likely preventing the dishwasher from heating water during the wash cycle. Symptoms may i... ✅ DIY Fixable

What Does Error iD0 Mean?

The AEG dishwasher error code iD0 indicates a heating issue, likely preventing the dishwasher from heating water during the wash cycle. Symptoms may include cold dishes post-cycle and possible premature cycle stops. This error often appears alongside error 13, suggesting a malfunction within the heating circuit components such as the heating element or temperature sensor. If you experience unusual sounds from the pump or pooling water, it's essential to address this promptly to avoid further complications.

Common Symptoms:

  • Dishwasher does not heat water during cycle
  • Error display shows iD0 (possibly alongside error 13)
  • Cycle may stop prematurely or dishes remain cold

Possible Causes

  • Unknown / undocumented in official sources (low)

How to Fix Error iD0

DIY Fix Basic checks for heating‑related issues

  1. Ensure the dishwasher completes the wash cycle and that water remains cold at the end.
  2. Check that the water supply temperature is within recommended limits.
  3. Run a reset by switching off the dishwasher from mains power for a few minutes and then restoring power.

Technician Only Diagnose heating circuit components

  1. Check the heating element continuity and operation.
  2. Inspect the temperature sensor (NTC) and related wiring.
  3. Verify the control board’s heating relay or triac operation.
  4. Confirm no other component faults (e.g., circulation pump interlocks).

Parts needed: Heating element, Temperature sensor (NTC / thermistor), Control board / relay, Pump assembly (if related)

🛑 When to Call a Pro:
  • If the error persists after basic resets
  • If water repeatedly remains cold during wash cycles
  • If multiple error codes appear concurrently

Technical Specifications

wattage 30W
component Drain Pump
resistance 10-20 ohms
part_number AEG 1240001000
voltage_rating 230V AC

Common Questions

What does iD0 error mean on AEG dishwasher?

The iD0 error indicates a heating issue, preventing water from reaching the desired temperature during the wash cycle.

Can I fix AEG dishwasher iD0 error myself?

Yes, you can check for basic heating issues, reset the dishwasher, and ensure the water supply temperature is within limits.

How much does it cost to fix iD0 error?

Repair costs for the iD0 error can range from ¥10,000 to ¥40,000+, depending on the parts replaced and service rates.

When should I call a technician for iD0?

Call a technician if the error persists after resets, if water remains cold, or if multiple error codes appear.

Sources & References

Data last verified: 2026-03-13

User Comments (0)

Share your experience or solution below.

Be the first to comment!