AEG Dishwasher Error iA0
⚡ Quick Answer: The AEG dishwasher error code iA0 indicates a malfunction likely related to the drain pump. This error often leads to unusual noises during the drain ... ✅ DIY Fixable
What Does Error iA0 Mean?
The AEG dishwasher error code iA0 indicates a malfunction likely related to the drain pump. This error often leads to unusual noises during the drain cycle and prevents the machine from emptying water effectively. Users may also experience issues with water circulation or spray arm movement, suggesting a need for thorough inspection and cleaning of the appliance's components.
Common Symptoms:
- Machine stops with iA0 displayed
- Possible issues with water circulation or spray arm rotation (community suggestion, not official)
Possible Causes
- Drain Pump Assembly
- Clogged Drain Hose
- Faulty Control Board
How to Fix Error iA0
DIY Fix Check Filters and Spray Arms
- Turn off and unplug the dishwasher for safety.
- Remove bottom filter assembly and clean out debris or food particles.
- Check spray arms for jamming or blockage; ensure they rotate freely.
- Reassemble and run a short cycle to see if the error clears.
Technician Only Inspect Circulation Pump and Related Components
- Diagnose the circulation pump for proper operation and impeller movement.
- Check sensor signals related to pump and spray arm motion.
- Test electrical continuity of circulation motor and control board outputs.
Parts needed: Circulation pump, Spray arm assembly, Flow or motor sensors
- If the error persists after basic filter and spray arm cleaning.
- If unusual noises, motor failure symptoms, or electrical faults are detected.
Next step
Choose the next step for iA0
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Dishwasher Circulation Pump
Circulates pressurized water through the dishwasher spray arms during the wash cycle.
- Typical part-only price
- $90 - $220
- DIY difficulty
- Hard
- Estimated time
- 60-120 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Spray Arm
Rotates and sprays high-pressure water to clean dishes inside the tub.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does iA0 error mean on AEG dishwasher?
The iA0 error indicates a drain pump malfunction, often resulting in unusual noises and failure to empty water.
Can I fix AEG dishwasher iA0 error myself?
Yes, you can check and clean the filters and spray arms, ensuring they are free of blockages.
How much does it cost to fix iA0 error?
The estimated repair cost for the iA0 error ranges from ¥15,000 to ¥40,000, depending on the specific parts needed.
When should I call a technician for iA0?
Call a technician if the error persists after cleaning or if you notice unusual noises or signs of motor failure.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!