Aeg Dishwasher Error i80

⚡ Quick Answer: The AEG dishwasher error code i80 indicates a drainage issue, specifically relating to the malfunction of the Auto door/AirDry function. This error ma... ✅ DIY Fixable

What Does Error i80 Mean?

The AEG dishwasher error code i80 indicates a drainage issue, specifically relating to the malfunction of the Auto door/AirDry function. This error may cause the dishwasher to emit a humming sound and fail to operate the Auto door properly during or after a wash cycle. Addressing this issue typically involves troubleshooting the AirDry mechanism and ensuring that all water supply lines are unobstructed.

Common Symptoms:

  • Dishwasher displays i80 error on the control panel
  • Auto door/AirDry may not function correctly during or after a cycle

Possible Causes

  • Auto door/AirDry function malfunction (high)

How to Fix Error i80

DIY Fix Basic troubleshooting and reset

  1. Turn off and unplug the dishwasher or switch off power at the fuse box
  2. Wait ~1 minute then restore power
  3. Check that the water supply is fully open and that no hoses are kinked or crushed
  4. Clean the dishwasher filter and sump area of foam/suds and debris
  5. Select a suitable cycle (including AirDry if available) and start the dishwasher to see if the error clears

Technician Only Inspect AirDry/Auto door mechanism and service

  1. Verify correct operation of the AirDry/Auto door actuator and related sensors
  2. Check wiring and connectors to the AirDry mechanism and control board
  3. Confirm no internal blockages or mechanical restrictions affecting the AirDry/Auto door
  4. Replace malfunctioning components as needed

Parts needed: Auto door/AirDry assembly, Related wiring harnesses and connectors, Possible control board if linked to AirDry control faults

🛑 When to Call a Pro:
  • If the error persists after reset and basic cleaning
  • If AirDry/Auto door does not operate normally after troubleshooting steps

Technical Specifications

wattage 30W
component Drain Pump
resistance 30-50 ohms
part_number AEG 1240001001
voltage_rating 230V AC

Common Questions

What does i80 error mean on AEG dishwasher?

The i80 error indicates a drainage issue due to a malfunction in the Auto door/AirDry function.

Can I fix AEG dishwasher i80 error myself?

Yes, you can try basic troubleshooting steps like resetting the appliance and checking water supply lines.

How much does it cost to fix i80 error?

Repair costs for the i80 error can range from US$150 to US$400+, depending on parts and labor.

When should I call a technician for i80?

Call a technician if the error persists after resetting and cleaning, or if the Auto door does not operate normally.

Sources & References

Data last verified: 2026-03-13

User Comments (0)

Share your experience or solution below.

Be the first to comment!