AEG Dishwasher Error E2

⚡ Quick Answer: The AEG Dishwasher E2 error indicates a malfunction of the heating element, leading to drainage issues. This may be accompanied by a humming sound and... ✅ DIY Fixable

What Does Error E2 Mean?

The AEG Dishwasher E2 error indicates a malfunction of the heating element, leading to drainage issues. This may be accompanied by a humming sound and the dishwasher may stop mid-cycle or fail to heat water properly. Regular checks can help identify this problem early.

Common Symptoms:

  • Dishwasher displays E2 on the panel
  • Dishwasher may stop mid-cycle or fail to heat water

Possible Causes

  • Heating element malfunction (high)

How to Fix Error E2

DIY Fix Check basic operation and restart

  1. Turn off the dishwasher and disconnect power for a few minutes
  2. Restart the dishwasher to see if error persists

Technician Only Inspect/replace heating element

  1. Disconnect dishwasher from power
  2. Access the internal heating element wiring and test for continuity
  3. Replace faulty heating element if tests confirm malfunction

Parts needed: Heating element, Associated wiring/connectors

🛑 When to Call a Pro:
  • If the E2 error persists after basic restart attempts
  • If the dishwasher shows additional faults such as water leakage or repeated cycle failures

Next step

Choose the next step for E2

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Heating Element

Heats the water or air inside the appliance to the required temperature.

Typical part-only price
$40 - $95
DIY difficulty
Medium
Estimated time
30-45 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 30W
component Drain Pump
resistance 10-20 ohms
part_number AEG 1520000001
voltage_rating 230V AC

Common Questions

What does E2 error mean on AEG Dishwasher?

E2 indicates a heating element malfunction affecting drainage and water heating.

Can I fix AEG Dishwasher E2 error myself?

Yes, try turning off the dishwasher and restarting it to see if the error persists.

How much does it cost to fix E2 error?

Repair costs for the E2 error range from $50 to $250, depending on parts and labor.

When should I call a technician for E2?

Contact a technician if the error persists after a restart or if you notice additional faults.

Sources & References

Data last verified: 2026-07-26

User Comments (0)

Share your experience or solution below.

Be the first to comment!