Zanussi Dishwasher Error ID0
⚡ Quick Answer: The Zanussi dishwasher error ID0 signifies a malfunction in the drain pump, often linked to motor issues or a faulty tachogenerator. Symptoms may incl... ⚠️ Difficulty Varies
What Does Error ID0 Mean?
The Zanussi dishwasher error ID0 signifies a malfunction in the drain pump, often linked to motor issues or a faulty tachogenerator. Symptoms may include the error code displayed, unexpected noises, or the appliance halting mid-cycle. Addressing this problem involves checking the motor and associated components to ensure proper operation.
Common Symptoms:
- Error code ID0 shown on display or via LED flash pattern
- Dishwasher may stop mid‑cycle
- Possible failure of motor operation (circulation/heating pump motor)
Possible Causes
- Motor failure or defect in motor tachogenerator/feedback sensor (medium)
How to Fix Error ID0
DIY Fix Basic checks before calling a technician
- Turn off and unplug the dishwasher for safety.
- Check that the dishwasher power supply is stable and that the machine was not interrupted by a power surge.
- Inspect accessible wiring to the motor area (only external/cabinet accessible connections) for obvious loose connectors if you are comfortable doing so; otherwise proceed to technician help.
- Restart the dishwasher to see if the code reappears (simple reset can clear transient faults).
Technician Only Diagnose and replace motor or associated feedback components
- Verify error code with diagnostic tool or manual LED flash interpretation.
- Inspect motor assembly and tachogenerator/feedback sensor wiring and connections for continuity and signs of damage.
- Test motor windings and tachogenerator function with multimeter/oscilloscope as appropriate.
- Replace faulty motor or tachogenerator/feedback component if confirmed defective.
- Reassemble and run full diagnostic wash cycle to confirm resolution.
Parts needed: Dishwasher circulation motor, Tachogenerator/feedback sensor, Associated wiring harness
- If the error code ID0 persists after basic reset and safety checks
- If there are signs of electrical burning or smoke
- If internal wiring or motor components show damage
Next step
Choose the next step for ID0
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Dishwasher Circulation Pump
Circulates pressurized water through the dishwasher spray arms during the wash cycle.
- Typical part-only price
- $90 - $220
- DIY difficulty
- Hard
- Estimated time
- 60-120 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does ID0 error mean on zanussi dishwasher?
ID0 error indicates a drain pump failure, often linked to motor issues or a faulty tachogenerator.
Can I fix zanussi dishwasher ID0 error myself?
Yes, you can perform basic checks like inspecting power supply and wiring connections before deciding to call a technician.
How much does it cost to fix ID0 error?
Repair costs for ID0 error typically range from medium to high, depending on parts and labor for the motor and sensor.
When should I call a technician for ID0?
Call a technician if the ID0 error persists after resets, if you notice electrical burning, or if internal components are damaged.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!