Zanussi Dishwasher Error C2
⚡ Quick Answer: The Zanussi dishwasher C2 error indicates a drainage problem, commonly linked to a blocked drain pump. Symptoms include the dishwasher not draining, f... ✅ DIY Fixable
What Does Error C2 Mean?
The Zanussi dishwasher C2 error indicates a drainage problem, commonly linked to a blocked drain pump. Symptoms include the dishwasher not draining, flashing LED lights, and water pooling at the bottom after a cycle. This issue can arise from blockages in the drain hose or improper installation. Regular maintenance and checks can help prevent this error.
Common Symptoms:
- Dishwasher does not drain
- LED flashes twice or beeps twice
- Water remains at bottom after cycle
Possible Causes
- Drain blockage or improper drain system installation (high)
How to Fix Error C2
DIY Fix Check and clear drain and installation
- Turn off and unplug the dishwasher (and shut off water supply) for safety.
- Check the drain hose for kinks, bends, or blockages; straighten or clear as needed.
- Ensure the sink drain outlet and trap are not clogged and that any blanking plug has been removed if newly installed.
- Clean filters and check that hoses are connected correctly with no obstructions.
- Restore power and run a short cycle to see if draining improves.
Technician Only Service drainage components
- Inspect and clear internal drain pump and hoses.
- Verify correct installation of drain hose and removal of any blanking plugs in trap.
- Test drain pump operation and replace if faulty.
- Check for any mechanical obstruction or damage in the drainage path.
Parts needed: Drain hose, Drain pump, Filters
- If draining issues persist after basic clearing and installation checks
- If pump shows mechanical failure or unusual noise during operation
- If error recurs immediately upon cycle start
Next step
Choose the next step for C2
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
- Typical part-only price
- $15 - $30
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does C2 error mean on Zanussi dishwasher?
C2 error signifies a drainage issue, often due to blockages or improper installation.
Can I fix Zanussi dishwasher C2 error myself?
Yes, you can check for kinks or blockages in the drain hose and ensure proper installation.
How much does it cost to fix C2 error?
Repair costs range from $100 to $300, depending on parts and labor in your region.
When should I call a technician for C2?
Call a technician if the issue persists after checking or if you hear unusual noises from the pump.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!