White-Westinghouse Oven Error F5
⚡ Quick Answer: The F5 error code on your White Westinghouse oven indicates a malfunction in the oven control board, which can lead to erratic temperature readings an... ✅ DIY Fixable
What Does Error F5 Mean?
The F5 error code on your White Westinghouse oven indicates a malfunction in the oven control board, which can lead to erratic temperature readings and unresponsive oven functions. This issue may prevent the heating elements from activating, resulting in inconsistent cooking performance. It's crucial to address this malfunction promptly to restore your oven's functionality.
Common Symptoms:
- Oven display shows F5 code on control panel
- Oven may not respond to user inputs
- Heating elements may not activate
- Oven functions appear unresponsive or intermittent
Possible Causes
- Defective oven control board (Electronic Range Control / Clock module) (medium)
How to Fix Error F5
DIY Fix Power cycle the oven
- Turn the oven off at the main power switch or circuit breaker.
- Wait 5–10 minutes to allow residual power to drain.
- Restore power and check if the F5 code clears.
Technician Only Inspect and possibly replace the oven control board
- Disconnect power to the oven at the circuit breaker.
- Remove the control panel to access the control board (also called ERC or clock module).
- Visually inspect the board for signs of damage (burn marks, bulging components).
- Test the board and associated wiring per service manual procedures.
- Replace the control board with an OEM equivalent if tests confirm failure.
- Reassemble and restore power, then verify normal operation.
Parts needed: Oven control board (Electronic Range Control / Clock), Control panel fasteners and connectors
- If the F5 error persists after power cycling
- If the oven is completely unresponsive or other fault codes appear
- If you are uncomfortable working with mains electrical components
Next step
Choose the next step for F5
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F5 error mean on white westinghouse oven?
F5 indicates a control board malfunction, causing erratic temperature and unresponsive oven functions.
Can I fix white westinghouse oven F5 error myself?
Yes, you can try power cycling the oven by turning it off and on after 5-10 minutes.
How much does it cost to fix F5 error?
Repair costs range from USD 150–350 for parts, plus labor depending on technician rates.
When should I call a technician for F5?
Call a technician if the error persists after power cycling or if the oven is unresponsive.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!