White-Westinghouse Dishwasher Error F2

⚡ Quick Answer: The F2 error code on your White Westinghouse dishwasher indicates a drainage malfunction. This issue may be accompanied by water remaining in the dish... ✅ DIY Fixable

What Does Error F2 Mean?

The F2 error code on your White Westinghouse dishwasher indicates a drainage malfunction. This issue may be accompanied by water remaining in the dishwasher after a cycle, an interruption during operation, or unusual noises. It typically signifies that the dishwasher could not drain water within the expected time, possibly due to a clogged filter, blocked drain hose, or a failing drain pump.

Common Symptoms:

  • Water remaining in the dishwasher after a cycle
  • Dishwasher stops mid‑cycle with F2 displayed
  • Water not being pumped out
  • Possible error during or after drain phase

Possible Causes

  • Clogged filter or debris in drainage system (medium)
  • Blocked or kinked drain hose (medium)
  • Drain pump blockage or failure (medium)

How to Fix Error F2

DIY Fix Check and clean filters and drain path

  1. Turn off the dishwasher and disconnect power.
  2. Remove the lower dish rack to access the filter at the bottom.
  3. Remove the filter assembly and rinse under warm water to clear any debris.
  4. Check the sump area for food particles or obstructions and clear them.
  5. Run a short cycle to see if the F2 error clears.

DIY Fix Inspect drain hose for kinks and blockages

  1. Locate the dishwasher’s drain hose (typically behind cabinet or under sink).
  2. Ensure the hose is free of kinks, bends, or sharp turns.
  3. Disconnect the hose at both ends and run water through it to check for blockages.
  4. Reconnect securely and test the dishwasher.

Technician Only Inspect and test drain pump

  1. Disconnect power and water supply.
  2. Remove the access panel to reach the drain pump.
  3. Check for internal blockages and remove any debris.
  4. Test the pump for electrical continuity and proper operation with a multimeter.
  5. Replace the drain pump if it fails electrical or operational tests.

Parts needed: drain pump assembly, gasket seals

🛑 When to Call a Pro:
  • If the F2 error persists after clearing filters, drain hose, and checking pump
  • If there are signs of internal leakage or electrical faults
  • If you are uncomfortable performing technical diagnostic steps

Next step

Choose the next step for F2

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Drain Pump

Pumps waste water out of the appliance during the drain cycle.

Typical part-only price
$35 - $80
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Also check
RepairClinic

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Dishwasher parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dishwasher Cleaner and Descaler

Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.

View maintenance supply
Maintenance supply

Braided Dishwasher Inlet Hose

For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

note The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering.
part_number None

Common Questions

What does F2 error mean on White Westinghouse dishwasher?

F2 indicates a drainage malfunction, often with water left in the dishwasher after a cycle.

Can I fix White Westinghouse dishwasher F2 error myself?

Yes, you can check and clean the filters and inspect the drain hose for blockages.

How much does it cost to fix F2 error?

Repair costs typically range from $50 to $200 depending on the required parts.

When should I call a technician for F2?

Call a technician if the F2 error persists after cleaning or if you notice leaks or electrical issues.

Data last verified: 2026-07-31

User Comments (0)

Share your experience or solution below.

Be the first to comment!