White-Westinghouse Dishwasher Error F5

⚡ Quick Answer: The F5 error on a White Westinghouse dishwasher signals a water level fault during the wash cycle. This issue typically occurs when the dishwasher fai... ✅ DIY Fixable

What Does Error F5 Mean?

The F5 error on a White Westinghouse dishwasher signals a water level fault during the wash cycle. This issue typically occurs when the dishwasher fails to detect water in the tub, often causing the cycle to stop prematurely. Commonly, it is linked to a malfunction in the drain pump or water inlet valve, leading to unusual noises during operation.

Common Symptoms:

  • Dishwasher stops partway through cycle and displays F5
  • No water detected in tub during wash phase
  • Cycle does not advance despite apparent power

Possible Causes

  • Water inlet valve failure or blockage (medium)
  • Wash pump not circulating/creating pressure (medium)

How to Fix Error F5

DIY Fix Check water supply and inlet components

  1. Ensure the water supply tap to the dishwasher is fully open.
  2. Check the water inlet hose for kinks or visible blockages.
  3. Clean the inlet filter screens (at supply connection) if accessible.
  4. Restart the dishwasher to see if the fault clears.

Technician Only Inspect and service filling/pressure system

  1. Test the water inlet valve for proper operation and replace if it fails to open or supply adequate flow.
  2. Check the wash pump for jams, debris, or electrical failure; clear or replace the pump as necessary.
  3. Verify the pressure/float sensor operation and its wiring, replacing any faulty parts.
  4. Confirm correct wiring and connections to the control board.

Parts needed: Inlet valve, Wash pump, Pressure/float sensor

🛑 When to Call a Pro:
  • If water supply and hose checks don’t correct the issue
  • If the inlet valve or wash pump shows signs of electrical failure
  • If internal parts need replacement

Next step

Choose the next step for F5

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Dishwasher Circulation Pump

Circulates pressurized water through the dishwasher spray arms during the wash cycle.

Typical part-only price
$90 - $220
DIY difficulty
Hard
Estimated time
60-120 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Dishwasher parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dishwasher Cleaner and Descaler

Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.

View maintenance supply
Maintenance supply

Braided Dishwasher Inlet Hose

For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

note The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering.
part_number None

Common Questions

What does F5 error mean on White Westinghouse dishwasher?

F5 error indicates a water level fault, meaning no water is detected during the wash cycle.

Can I fix White Westinghouse dishwasher F5 error myself?

Yes, check the water supply, hose for blockages, and clean inlet filter screens.

How much does it cost to fix F5 error?

Repair costs for the F5 error typically range from $100 to $350.

When should I call a technician for F5?

Call a technician if basic checks don't resolve the issue or if internal parts need replacement.

Data last verified: 2026-07-31

User Comments (0)

Share your experience or solution below.

Be the first to comment!