Whirlpool Dishwasher Error Sud

⚡ Quick Answer: Sud means Whirlpool Dishwasher error Sud indicates an excessive amount of suds in the wash chamber, often causing the unit to disp... This is typically a DIY fix.

What Does Error Sud Mean?

Whirlpool Dishwasher error Sud indicates an excessive amount of suds in the wash chamber, often causing the unit to display an error code and may lead to leaks.

Common Causes

  • Using non-dishwasher detergent (60% likelihood)
  • Blocked drain filter (30% likelihood)
  • Faulty detergent dispenser (10% likelihood)

Troubleshooting Steps

  1. Step 1: Check for Non-Dishwasher Detergent

    Inspect the detergent used in the dispenser. If it's regular dish soap, replace it with a proper dishwasher detergent.

    Always use detergent specifically designed for dishwashers.

  2. Step 2: Inspect the Drain Filter

    Remove the bottom rack and take out the drain filter. Clean it thoroughly to remove any debris or suds accumulation.

    A clean filter helps prevent future suds issues.

  3. Step 3: Examine the Detergent Dispenser

    Check if the detergent dispenser is stuck or malfunctioning. Manually test its opening and closing mechanism.

    Replace the dispenser if it fails to operate correctly.

  4. Step 4: Run a Rinse Cycle

    After addressing the detergent issue, run a short rinse cycle to clear out any remaining suds.

    This helps reset the system and remove excess soap.

  5. Step 5: Monitor for Recurrence

    After completing the above steps, observe the dishwasher during the next few cycles for any signs of excessive suds.

    If the error persists, consider professional assistance.

How to Reset

To reset the Sud error, turn off the dishwasher and unplug it for 5 minutes. Then plug it back in and restart the cycle.

Technical Specifications

wattage 1440W
component Control Board
resistance 10-30 ohms
part_number W10812395
voltage_rating 120V AC

Frequently Asked Questions

Can I use regular dish soap in my Whirlpool dishwasher?

No, using regular dish soap can create excessive suds and lead to error Sud.

How long does it take to fix the Sud error?

Typically, it takes about 30-45 minutes to troubleshoot and resolve the Sud error.

What causes the Sud error in my dishwasher?

The Sud error is usually caused by using non-dishwasher detergent or a clogged drain filter.

Should I call a professional if the Sud error keeps appearing?

Yes, if the error persists after troubleshooting, it's best to consult a professional technician.

What happens if I ignore the Sud error?

Ignoring the Sud error can lead to leaks, water damage, and potential damage to the dishwasher.

User Comments (0)

Share your experience or solution below.

Be the first to comment!