Whirlpool Dishwasher Error FP

⚡ Quick Answer: FP means Whirlpool Dishwasher error FP indicates a malfunction in the flood protection system, often accompanied by unusual sound... This is typically a DIY fix.

What Does Error FP Mean?

Whirlpool Dishwasher error FP indicates a malfunction in the flood protection system, often accompanied by unusual sounds or a flashing display.

Common Causes

  • Flood protection switch (50% likelihood)
  • Water inlet valve (30% likelihood)
  • Clogged drain (20% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the flood protection switch

    Locate the flood protection switch, usually found near the base of the dishwasher. Check for any debris or blockages that may prevent it from functioning properly.

    Ensure the switch moves freely without obstruction.

  2. Step 2: Check the water inlet valve

    Disconnect the water supply and inspect the water inlet valve for any signs of damage or malfunction. Use a multimeter to test for continuity.

    Replace the valve if it shows no continuity.

  3. Step 3: Examine the drain for clogs

    Remove the drain filter and check for any clogs or debris. Clear any blockages to ensure proper drainage.

    A clean drain helps prevent future errors.

  4. Step 4: Reset the dishwasher

    After addressing the potential issues, reset the dishwasher by holding the Start and Cancel buttons simultaneously for 3 seconds.

    This may clear the error if the underlying issue is resolved.

How to Reset

To reset the FP error, hold the Start and Cancel buttons simultaneously for 3 seconds.

Technical Specifications

wattage N/A
component Flood Protection Switch
resistance 10-20 ohms
part_number W10712395
voltage_rating 120V AC

Frequently Asked Questions

Can I fix the FP error myself?

Yes, if you have basic tools and follow the troubleshooting steps, you can address the FP error.

How long does it take to fix the FP error?

Typically, it takes about 45-60 minutes to diagnose and fix the FP error.

What causes the FP error in my Whirlpool dishwasher?

The FP error is often caused by a malfunctioning flood protection switch or issues with the water inlet valve.

Should I call a professional for the FP error?

If you are uncomfortable with electrical components or the issue persists after your attempts, it's best to call a professional.

When should I consider replacing parts related to the FP error?

If the flood protection switch or water inlet valve fails continuity tests, they should be replaced to resolve the error.

User Comments (0)

Share your experience or solution below.

Be the first to comment!