Whirlpool Dishwasher Error F7

⚡ Quick Answer: F7 means Whirlpool Dishwasher error F7 indicates a malfunction in the drain pump, often accompanied by unusual noises during oper... This is typically a DIY fix.

What Does Error F7 Mean?

Whirlpool Dishwasher error F7 indicates a malfunction in the drain pump, often accompanied by unusual noises during operation and failure to drain water.

Common Causes

  • Drain Pump (50% likelihood)
  • Wiring Issues (30% likelihood)
  • Control Board Failure (20% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the Drain Pump for Blockages

    Remove the lower spray arm and drain cover to access the drain pump. Check for any debris or clogs that may be obstructing the pump.

    Use a flashlight to see inside the pump area clearly.

  2. Step 2: Test the Drain Pump with a Multimeter

    Disconnect the power supply and use a multimeter to check the resistance of the drain pump. It should read between 10-30 ohms. If it reads infinite, the pump is faulty.

    Ensure the multimeter is set to the correct resistance setting.

  3. Step 3: Examine Wiring Connections

    Check the wiring harness connected to the drain pump for any signs of damage or loose connections. Repair or replace as necessary.

    Make sure to secure all connections tightly.

  4. Step 4: Replace the Drain Pump if Necessary

    If the pump is faulty, remove it by unscrewing the mounting screws and disconnecting the wiring. Install the new pump by reversing the removal process.

    Ensure the new pump is compatible with your dishwasher model.

  5. Step 5: Reassemble and Test the Dishwasher

    Reattach the drain cover and lower spray arm. Turn on the water supply and run a short cycle to test if the error code persists.

    Monitor for any unusual sounds during operation.

How to Reset

To reset the F7 error, press and hold the Start/Cancel button for 3 seconds. If the error persists, further troubleshooting is required.

Technical Specifications

wattage 40W
component Drain Pump
resistance 10-30 ohms
part_number W10822645
voltage_rating 120V AC

Frequently Asked Questions

Can I fix the F7 error myself?

Yes, if you have basic tools and follow the troubleshooting steps carefully.

How much does it cost to replace the drain pump?

The cost of a new drain pump typically ranges from $50 to $150, depending on the model.

What causes the F7 error in my dishwasher?

The F7 error is usually caused by a malfunctioning drain pump or blockages preventing water drainage.

Should I call a professional for the F7 error?

If you're uncomfortable with electrical components or the issue persists after troubleshooting, it's best to call a professional.

When should I consider replacing my dishwasher?

If multiple error codes appear frequently or repairs exceed the cost of a new unit, it may be time to replace it.

User Comments (0)

Share your experience or solution below.

Be the first to comment!