Whirlpool Dishwasher Error F13
⚡ Quick Answer: The Whirlpool Dishwasher error F13 indicates a water leakage detection issue, often linked to main control board or heating circuit failures. Symptoms... ⚠️ Difficulty Varies
What Does Error F13 Mean?
The Whirlpool Dishwasher error F13 indicates a water leakage detection issue, often linked to main control board or heating circuit failures. Symptoms include the dishwasher stopping mid-cycle, dishes not being properly cleaned, and failure to reach the required water temperature. Unusual sounds from the pump area may also be present. To resolve this error, basic checks like resetting the dishwasher and ensuring proper door latching and water supply can be attempted, but persistent issues may require professional diagnosis.
Common Symptoms:
- Dishwasher stops mid‑cycle with F13 displayed
- Water not heating to required temperature
- Dishes emerge not properly cleaned/heated
- Dishwasher fails to complete wash cycle
Possible Causes
- Main control board failure / communication fault (medium)
- Heating circuit / temperature regulation failure (medium)
- Potential water softener/hardness sensor fault (less common view) (low)
How to Fix Error F13
DIY Fix Basic checks and reset
- Turn off and unplug the dishwasher or switch off the breaker for 5–10 minutes to reset control electronics.
- Ensure the door latches securely and that the water supply valve under the sink is fully open.
- Run a short cycle to see if the error clears after reset.
Technician Only Diagnose control board and heating circuit
- Use diagnostic mode (if available on model) to confirm F13 and log any additional codes.
- Inspect and test the heating element for continuity with a multimeter.
- Inspect the temperature sensor/thermistor and associated wiring for damage or loose connections.
- Test or replace the main control board if faults are confirmed.
- Verify that wiring harness connections between control board and heating circuit/display panel are secure.
Parts needed: Main control board, Heating element, Temperature sensor/thermistor, Associated wiring harnesses
- If you lack comfort working with electrical components and control boards.
- If board or heating circuit tests indicate component failure.
- If error persists after power reset and basic checks.
Next step
Choose the next step for F13
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Heating Element
Heats the water or air inside the appliance to the required temperature.
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
Thermistor
Measures precise temperature changes and sends resistance feedback to the control board.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F13 error mean on Whirlpool Dishwasher?
F13 indicates a water leakage detection issue, potentially linked to main control board or heating circuit failures.
Can I fix Whirlpool Dishwasher F13 error myself?
Yes, you can perform basic checks like resetting the appliance and ensuring the door is secure. If issues persist, seek professional help.
How much does it cost to fix F13 error?
The estimated repair cost for the F13 error ranges from $150 to $400, including parts and labor.
When should I call a technician for F13?
Call a technician if you are uncomfortable with electrical components, if tests indicate component failure, or if the error persists after basic checks.
Sources & References
- Code erreur F13 sur lave vaisselle Whirlpool (community)
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!