Whirlpool Dishwasher Error F10

⚡ Quick Answer: The Whirlpool Dishwasher error F10 indicates a temperature sensing issue, often related to a faulty NTC temperature sensor or a malfunctioning heating... ⚠️ Difficulty Varies

What Does Error F10 Mean?

The Whirlpool Dishwasher error F10 indicates a temperature sensing issue, often related to a faulty NTC temperature sensor or a malfunctioning heating element. This error typically causes the dishwasher to halt mid-cycle and may prevent it from properly heating water, leading to incomplete cleaning cycles. Unusual sounds from the pump might also accompany this error code, signaling a drainage issue as a secondary concern.

Common Symptoms:

  • Dishwasher stops mid‑cycle and displays F10
  • Dishwasher fails to heat water properly
  • Cycle does not complete due to perceived temperature issue

Possible Causes

  • Faulty NTC temperature sensor (medium)
  • Heating element or associated wiring issue (medium)

How to Fix Error F10

DIY Fix Basic checks and resets

  1. Disconnect power to the dishwasher for at least one minute to reset.
  2. Ensure household hot water supply is functioning normally.

Technician Only Diagnose and replace temperature sensor or heating element

  1. Remove the dishwasher’s lower access panel to locate the temperature (NTC) sensor.
  2. Test the sensor resistance with a multimeter against manufacturer specifications.
  3. If the sensor is out of range, replace it.
  4. Inspect the heating element and associated wiring for continuity; replace if faulty.

Parts needed: NTC temperature sensor, Heating element, Wiring harness/connectors

🛑 When to Call a Pro:
  • If you cannot safely access internal components.
  • If multimeter testing shows inconsistent readings but the cause is unclear.
  • If parts replacements do not clear the F10 error.

Technical Specifications

wattage 60W
component Drain Pump
resistance 10-20 ohms
part_number W10537869
voltage_rating 120V AC

Common Questions

What does F10 error mean on Whirlpool Dishwasher?

F10 indicates a temperature sensing issue, often due to a faulty temperature sensor or heating element.

Can I fix Whirlpool Dishwasher F10 error myself?

Yes, you can reset the dishwasher and check the hot water supply. However, replacing parts should be done by a professional.

How much does it cost to fix F10 error?

Estimated repair costs range from ¥5,000 to ¥25,000+, depending on parts and labor.

When should I call a technician for F10?

Call a technician if you cannot safely access components, if testing shows inconsistent readings, or if parts replacement does not resolve the issue.

Sources & References

Data last verified: 2026-01-10

User Comments (0)

Share your experience or solution below.

Be the first to comment!