Whirlpool Air Conditioner Error E2

⚡ Quick Answer: The E2 error code on Whirlpool air conditioners indicates a malfunction in the indoor temperature sensor, which may lead to inaccurate temperature rea... ⚠️ Difficulty Varies

What Does Error E2 Mean?

The E2 error code on Whirlpool air conditioners indicates a malfunction in the indoor temperature sensor, which may lead to inaccurate temperature readings or the unit failing to cool effectively. This error can also trigger a protective shutdown to prevent freezing or damage to the system. Addressing this issue typically involves inspecting and possibly replacing the temperature sensor or ensuring proper airflow and connections.

Common Symptoms:

  • Unit displays E2 and stops cooling
  • Abnormal temperature regulation detected
  • Possible protective shutdown to prevent freeze or damage

Possible Causes

  • Indoor/evaporator temperature sensor malfunction (medium)
  • Protective anti‑freeze/protection mode triggered by abnormal coil/evaporator conditions (medium)

How to Fix Error E2

DIY Fix Basic Troubleshooting Steps

  1. Turn off the AC and disconnect power for a few minutes to reset control logic
  2. Clean/replace air filters to ensure proper airflow
  3. Check that indoor unit sensors and visible wiring/connectors are securely connected

Technician Only Sensor and Control Inspection

  1. Test indoor/evaporator temperature sensors (thermistors) with a multimeter
  2. Inspect wiring harnesses for open/short circuits
  3. If sensor faults confirmed, replace the faulty temperature sensor
  4. Verify that protective anti‑freeze conditions are not caused by refrigerant or airflow problems

Parts needed: Temperature sensor (thermistor), Wiring harness, Control board (if diagnosing communication faults)

🛑 When to Call a Pro:
  • If sensor replacement does not clear error
  • If wiring inspection reveals damage or refrigerant/coil frost issues

Technical Specifications

wattage
component Indoor Temperature Sensor
resistance 10-15 kΩ
part_number W10620456
voltage_rating 120V AC

Common Questions

What does E2 error mean on whirlpool air conditioner?

E2 indicates a temperature sensor malfunction, causing cooling issues.

Can I fix whirlpool air conditioner E2 error myself?

Yes, you can reset the unit, clean filters, and check connections.

How much does it cost to fix E2 error?

Repair costs range from $80 to $300 for sensor replacement and diagnostics.

When should I call a technician for E2?

Call if the error persists after DIY fixes or if you find damaged wiring.

Sources & References

Data last verified: 2026-03-18

User Comments (0)

Share your experience or solution below.

Be the first to comment!